How do I change the wiper blades on a Nissan Micra?

How do I change the wiper blades on a Nissan Micra?

Nissan Micra Owners Manual

1. Lift the wiper arm away from the windshield.
2. Push the release tab B .
3. Move the wiper blade A down and remove.
4. Insert the new wiper blade onto the wiper arm until it clicks into place.
5. Push wiper on to windshield.

How do you change the rear wiper on a Nissan Micra?

1. Release the old blade. Lift the wiper arm off the window.
2. Remove the wiper. The blade will release from the wiper arm.
3. Position the new blade. Place the small bar attachment on the new wiper blade into the hook on the wiper arm.
4. Lock the blade into place. Rotate the blade away from you and it will snap into place.
5. Done!

Why are my wipers not working on my K12 Micra?

My girlfriends K12 Micra had an intermittant fault with the wipers randomly coming on. This happened first a few weeks ago. She only uses the car at weekends and some evenings and this happened a few times but not every time the car was used. The washers worked fine at this point.

How much does Nissan charge for front wiper linkage?

Im happy to pay for delivery its just that Nissan want £250 for a new linkage and motor when these is nothing wrong with the current motor, they say its a set and thats how it need to be ordered. Oh and they also say its gonna take 21days!??!

What to do if your Micra washer pump is not working?

In the end i put a big lump of grease inside the bottom of unit around the shaft to stop the water coming in again. If in case by now you still have problems with your K12 Micra Wipers and washer pump, I think it will be best for you to visit a dealer to get a new one or replaced your old one. Final Update on this!

How can I Fix my K12 front wiper linkage?

· Buy a genuine new arm for approximately £100 and wait for it to wear again. · Grind off the plastic socket and spot welds the right size washer over the ball. This being the most popular fix for garage mechanics. Drill through the mild steel ball with a 4mm drill. No need to centre punch as there is already a pop mark present.

My girlfriends K12 Micra had an intermittant fault with the wipers randomly coming on. This happened first a few weeks ago. She only uses the car at weekends and some evenings and this happened a few times but not every time the car was used. The washers worked fine at this point.

How to repair Nissan Micra wiper motor linkage?

How to repair Nissan Micra Windscreen Wiper Motor Linkage.It will fit all Micra made between 2002-2010To buy https://www.askthemechanic.co.uk/shop/53-nissan-… AboutPressCopyrightContact usCreatorsAdvertiseDevelopersTermsPrivacyPolicy & SafetyHow YouTube worksTest new features

How to fix Nissan K12 front wiper linkage?

Tighten the two nuts against each other and presto. An observation on disassembly: Nissan seem to overgrease these joints. A plastic joint needs very little and sometimes works best almost dry. Has gone over to the oily side… A plastic joint needs very little and sometimes works best almost dry. Click to expand… Best tip in this thread so far.

In the end i put a big lump of grease inside the bottom of unit around the shaft to stop the water coming in again. If in case by now you still have problems with your K12 Micra Wipers and washer pump, I think it will be best for you to visit a dealer to get a new one or replaced your old one. Final Update on this!