How do I bypass a Datatool alarm?
if you can disarm it , turn ignition on and press and hold the disarm button again until it beeps. this will put it into service mode which wont imobilise the bike or set the alarm. remove the fuse and the alarm battery will eventually go flat over a day or 3.
How do I turn off Datatool on Galaxy s4?
Put the alarm in winter mode (ignition on (don’t start bike), hold black and grey buttons for 10 seconds, should hear a beep, then turn ignition off). Remove both seats and seat fairing. Unplug alarm from harness, install blanking plug, remove alarm and rebuild.
Is a data tag a tracker?
Datatag has made a major impact on reducing theft and the Crown Prosecution Service has a 100% successful prosecution rate when evidence has been supplied by Datatag. Our award winning systems are used to deter theft but increasingly they are being used as a valuable asset tracking system.
How much is a Datatool tracker?
Datatool (Scorpion Automotive) has its own in-house monitoring team on duty 24 hours as day, seven days a week. Subscription costs £9.95 per month (£119.40/year) or you can pay £109 annually. Coverage include all of Western Europe and some countries beyond.
Can you put an alarm on a motorcycle?
The easiest way to steal a bike is to load it into a van. However, any movement of the motorcycle can trigger an alarm, especially a disc lock alarm placed on each wheel. In addition, some motorcycle alarm systems have GPS chip trackers that let you track the bike in case the thief manages to get away with it.
How does datatool S4 Red alarm immobiliser work?
Alarm Diagnostics: If the alarm has triggered whilst you were away, the S4 will bleep a code to tell you which input caused the trigger. Transport Mode: Ability to arm without movement sensing if the bike or scooter is being transported.
What’s the best way to reset a car immobilizer?
Hold down the panic button for five seconds to reset the immobilizer. Next, push the lock button two times and wait ten feet away from the car for ten minutes. Then hit the unlock button on the fob twice this should deactivate the security system which should be accompanied by exterior lights flashing or an audible horn beep.
When to disarm the datatool system on a motorcycle?
INITIAL OPERATION – STANDARD MODE When you collect your motorcycle, the Datatool System will be armed in STANDARD MODE. In this mode the system arms automatically, 30 seconds after you switch off the ignition. Before moving or starting your motorcycle, You will need to DISARM the system.
When to deactivate datatool S4 red remote control?
The Datatool S4 Red is designed for professional installation by authorised Datatool installers only. PIN Override: With a user selectable PIN code the unit can be deactivated if a remote control is damaged or lost.
Alarm Diagnostics: If the alarm has triggered whilst you were away, the S4 will bleep a code to tell you which input caused the trigger. Transport Mode: Ability to arm without movement sensing if the bike or scooter is being transported.
The Datatool S4 Red is designed for professional installation by authorised Datatool installers only. PIN Override: With a user selectable PIN code the unit can be deactivated if a remote control is damaged or lost.
INITIAL OPERATION – STANDARD MODE When you collect your motorcycle, the Datatool System will be armed in STANDARD MODE. In this mode the system arms automatically, 30 seconds after you switch off the ignition. Before moving or starting your motorcycle, You will need to DISARM the system.
Why is my datatool not working on my bike?
In my opinion entirely unsuitable for touring as I find it a pig to live with. Was sent round in circles between Triumph and datatool trying to get information how to remove it. Reason is if the remote battery dies or anything else happens (like you step on it or it gets wet) you can’t use the bike.