How do I add memory to my HP Designjet 500?

How do I add memory to my HP Designjet 500?

The HP Designjet 500 series printers ship with 16 MB DRAM. You can upgrade by adding an HP-GL/2 accessory card. The card has an additional 16 MB DRAM. In addition, there is one free SODIMM slot on the HP-GL/2 card.

How do I reset my HP Designjet 500?

HP Designjet 500 or 800 series Press the Up or Down Arrow until Card Setup is on the display, then press ENTER. Press the Up or Down Arrow until Advanced is on the display, then press ENTER. Press the Up or Down Arrow until Reset card is on the display, then press ENTER.

How do I reset the memory on my HP printer?

1. Press the “Cancel” or “Reset” button on your HP LaserJet printer repeatedly until the printer’s display shows “Ready.”
2. Turn your HP LaserJet printer’s power switch to “Off” to clear the memory, if the printer’s display doesn’t show “Ready.” The power switch is located on the side or back of the printer.

How do I fix printer memory error?

How to Fix Supply Memory Error on Your Printer

1. Step 1: Check for Obstructions. First, remove your cartridge from the printer. Check it carefully for any packaging material that might have been left on the cartridge.
2. Step 2: Reset the printer. With the printer turned on, disconnect the power cord from the printer.

How do I reset my HP 510?

To remove all calibrations and reset the Printer to its factory values, choose Color calibration>Reset from the Ink menu….Color Calibration

1. From the main menu on the front panel, select the Ink System icon (Figure 8) and press ENTER.
2. Select Color calibration (Figure 9) and press ENTER.

How do I clear my printers cache memory?

Click “See What’s Printing.” Open the “Printer” menu, pick “Cancel All Documents” and choose “Yes.” The list should clear within a few seconds. If one or more print jobs remain on the list, reboot your computer to clear out the memory.

How do I fix my supply memory error?

How do I get rid of supply memory error?

Solution 1: Make sure that there is no packing material inside the printer

1. Openthe cartridge access door.
2. Lift up the paper packing material, but do not remove it.
3. Remove the print cartridge packing material.
4. Remove the print cartridge fromthe printer.
5. Remove the packing material from inside the printer.

Why does my printer says supply memory error?

A supply memory error happens when the metal contacts / chip on a toner cartridge don’t correctly connect with the corresponding contacts inside the printer. The printer cannot detect the toner cartridge and displays the ‘Supply Memory Error’ message on the printer display panel.