How can I Fix my Jeep Cherokee heater?
Every Cherokee in this range either has, or will have, this common failure. The pictures show the hardware provided for the fix. All work is done from the foot area of the passenger side of the Jeep, with a Dremel cut in the bottom of the heater box…no removal of the dash panel or evacuating the AC system and draining the radiator.
Where do you change the radiator on a jeep?
All work is done from the foot area of the passenger side of the Jeep, with a Dremel cut in the bottom of the heater box…no removal of the dash panel or evacuating the AC system and draining the radiator. Once completed, the alterations are under the dash panel in the foot area and are not visible.
How to regulate between heat and AC in Jeep Cherokee?
You can grasp the axle with your fingers and feel the extents of movement of the door by turning the knob. You should be able to manually regulate between heat and AC by turning the axle. The door should hit a hard stop point when you turn it to heat or AC and not have any play beyond that point.
What should I do about my Jeep Cherokee blend door?
This is a kit to do a complete repair on the blend door malfunction that is common to the 97- 01 Jeep Cherokee. Every Cherokee in this range either has, or will have, this common failure.
Can a blend door be replaced in a Jeep Cherokee?
If the system is loose or ineffective, the blend door is the problem and the HeaterTreater is the solution. This kit replaces the plastic door and axle with stainless steel components that can withstand the force and will last longer than the Cherokee.
Every Cherokee in this range either has, or will have, this common failure. The pictures show the hardware provided for the fix. All work is done from the foot area of the passenger side of the Jeep, with a Dremel cut in the bottom of the heater box…no removal of the dash panel or evacuating the AC system and draining the radiator.
You can grasp the axle with your fingers and feel the extents of movement of the door by turning the knob. You should be able to manually regulate between heat and AC by turning the axle. The door should hit a hard stop point when you turn it to heat or AC and not have any play beyond that point.
All work is done from the foot area of the passenger side of the Jeep, with a Dremel cut in the bottom of the heater box…no removal of the dash panel or evacuating the AC system and draining the radiator. Once completed, the alterations are under the dash panel in the foot area and are not visible.
Why does my Chevy Camaro heater not work?
They both should feel warm or hot to the touch with the engine on. If one of the hoses is hot, and the other one is cold, that is a pretty good indication that the heater core is clogged. If the neither hose has any heat, you may have air in the cooling system, low fluid, or low pressure.
Why did my a / C fail on my Jeep Cherokee?
Failure of your heat and/or A/C in your Jeep Cherokee is due to the failure of your blend door. Heater Treater replaces the cheap, plastic blend door with steel.
Is there a dual zone heater treater for Jeep Grand Cherokee Limited?
Heater Treater’s Dual Zone Blend Door fix is for Grand Cherokee Limited’s with dual zone temperature controls. You can read the fail codes on the system by following this procedure:
Why did my a / C fail on my Jeep Grand Cherokee?
Failure of your heat and/or A/C in your Jeep Grand Cherokee is due to the failure of your blend door. Heater Treater replaces the cheap, plastic blend door with steel.
How do you remove the dash from a Jeep Cherokee?
Locate the retainer bolts on the ends of the dash panel and remove them with the socket wrench. Remove the final retainer bolt positioned on top of the brake pedal in a similar fashion.Slide the dash towards you and disconnect the electrical connectors going into the back side of the dash. Drag the dash up and carry it out of your Jeep.
How do you remove radio from Jeep Cherokee?
Identify the two retainer screws for the radio panel. There is one screw on each side of the radio. Remove these screws with the Phillip’s head screwdriver and slide the panel forward. Unplug the radio’s electrical connectors. Drag the heater control assembly forward.
Can a Jeep Liberty heater core be removed?
Jeep LIberty (KK) Heater Core without Removing A/C necessary Modification to Heater Box. – YouTube Jeep LIberty (KK) Heater Core without Removing A/C necessary Modification to Heater Box.
Why does my AC heater keep stalling when I open the door?
The issue with the system is that the drive motor has a wider range of motion than the movement of the door will allow. At the extents of movement (full heat or full AC), the motor overdrives the plastic blend door into the the internal stop point in the heater box until the motor stalls.
How does the blend door work on a Jeep Cherokee?
– The Cherokee is built with a Blend Door to control the heater and AC function. The blend door controls air flow through either the AC evaporator or the heater coil, or any combination in between. The doors are controlled by a stepper motor.
Where is the fuse box on a Jeep Grand Cherokee?
It is located behind the lid under the glove compartment. Back-Up Lamp Switch (Diesel), Vehicle Information Center, Graphic Display Module (Mini Overhead Console), Park/Neutral Position Switch, Speed Proportional Steering Module, Headlamp Leveling Switch, Combination Flasher, Automatic Day/Night Mirror, Overhead Console