Does the 2011 Hyundai Sonata have a spare tire?
The spare tire in the 2011 Hyundai Sonata is T125/80D16. It is located in the trunk below the liner along with the tools needed to change it. The toolkit sits in a molded foam organizer that sits in the center of the spare tire.
What size tire goes on a 2011 Hyundai Sonata?
Hyundai Sonata 2011 2.4i
| Tire | Rim | |
|---|---|---|
| 205/65R16 94H | 6.5Jx16 ET43 | 2.3 |
| 215/55R17 93V | 6.5Jx17 ET46 | 2.3 |
| 225/45R18 95V | 7.5Jx18 ET48 | 2.4 |
What’s the rim size on a 2011 Hyundai Sonata?
Your Hyundai Sonata’s rim size is the number to the right of the R. In the example pictured here, the tire size fits 16-inch rims. Now that you know your rim size, make a selection below to filter your results. The original tire size for your 2011 Hyundai Sonata is listed below.
What kind of tires do I need for my Hyundai Sonata?
Factory size of tires for Hyundai Sonata 1 P205/65R15 2 P205/60R16 3 P205/65R16 4 P215/60R16 5 P215/55R17 6 P225/50R17 7 225/45R18 8 235/45R18
What kind of tread pattern does Hyundai Sonata use?
The asymmetric tread pattern ensures smooth and quiet operation and is equipped with the company’s IntelliSipe technology, which consists of zigzag sipes that interlock under the surface. This increases the rigidity of the tread block and optimizes the contact of the tire with the road.
How do you reinstall a flat tire on a Hyundai Sonata?
To reinstall the wheel, hold it on the studs, put the wheel nuts on the studs and tighten them finger tight.The nuts should be installed with their tapered small diameter ends directed inward. Jiggle the tire to be sure it is completely seated, then tighten the nuts as much as possible with your fingers again.
Factory size of tires for Hyundai Sonata 1 P205/65R15 2 P205/60R16 3 P205/65R16 4 P215/60R16 5 P215/55R17 6 P225/50R17 7 225/45R18 8 235/45R18
The asymmetric tread pattern ensures smooth and quiet operation and is equipped with the company’s IntelliSipe technology, which consists of zigzag sipes that interlock under the surface. This increases the rigidity of the tread block and optimizes the contact of the tire with the road.
To reinstall the wheel, hold it on the studs, put the wheel nuts on the studs and tighten them finger tight.The nuts should be installed with their tapered small diameter ends directed inward. Jiggle the tire to be sure it is completely seated, then tighten the nuts as much as possible with your fingers again.
What to do if you have a flat tire on a Hyundai Elantra?
1. Park on a level surface and apply the parking brake firmly. 2. Shift the shift lever into R (Reverse) with manual transaxle or P (Park) with automatic transaxle. 3. Activate the hazard warning flasher. 4. Remove the wheel lug nut wrench, jack, jack handle, and spare tire from the vehicle.