Do you need starter shingles for roof?
The starter strip is crucial because it adheres to the shingles on the edges of your roof and protects them from the elements. Without starter strip shingles, a gust of wind would have no trouble sneaking under the shingles on the edges of your roof and blowing them up, and perhaps even off, your roof.
Where do starter shingles go on a roof?
Starter shingle should be installed around ALL edges of your roof. To meet code, technically it only needs to be installed on the bottom eaves, but there are some big benefits to installing it up the rake edges as well (also known as gable edges).
What is GAF starter strip?
Starter strip shingles include a high-quality, properly positioned adhesive that will tightly lock your shingles in place to help prevent shingle blow-off Link Description.
Do you use starter shingles on the rake?
A starter shingle is used to seal with the field shingle at the first course along the eave and rake. This helps prevent wind and water from getting beneath the shingle in this critical location. Starter shingles are installed so they overhang the edge of the eaves slightly to allow for water runoff.
Why do you put the first row of shingles upside down?
The sealant on an upside-down three-tab shingle ends up far too high up the roof to effectively seal the first course of the finished shingles. The proper way to adapt three tabs as starters is to trim the tabs off the shingle along a line across the tops of the cutouts.
Should shingles overhang drip edge?
Yes. Shingles should not extend more than 3/4” (19 mm) past the drip edge. If shingles overhang the edge of the roof by more than 3/4” (19 mm), then they are not supported and may crack and break off. In addition, the wind resistance at the roof edge may be compromised.
How do I keep my roof shingles straight?
Keeping the Roofing Line Straight e shingles aligned vertically and horizontally. A chalk line can keep your line straight over long distances and large areas. A chalk line can help eliminate short exposures, waviness and additional antithetical issues.
Do you peel the plastic strip off shingles?
No. The GAF shingle application instructions for our entire product line specifically state that that film does not need to be removed. Note: The film strips on the back of each shingle are to prevent sticking together of the shingles while in the bundle. Their removal is NOT required during application.
Can you use weatherblocker on starter strip shingles?
Using WeatherBlocker™ Premium Eave/Rake Starter Strip Shingles tightly locks your shingles in place and helps prevent shingle blow-off. Plus, installers like that they’re easy to use with no cutting on the roof, while homeowners feel good about the fact that they create less waste.
Why do you need starter strip shingles for your roof?
Cost-effective starter strip shingles with properly-positioned adhesive help resist shingle blow-off. Pre-cut eave/rake starter strips are one of the most overlooked parts of a roofing system!
What kind of roofing system does GAF cover?
Lifetime coverage on shingles requires the use of GAF Lifetime Shingles only. Lifetime coverage on shingles and accessories requires the use of any GAF Lifetime Shingle and any 3 qualifying GAF Accessories. See GAF Roofing System Limited Warranty for complete coverage and restrictions.
What kind of shingles to use for starter course?
Pro-Start® Eave/Rake Starter Strip Shingles provide a cost-effective alternative to using cut-up 3-tab strip shingles as your starter course.