Do you have to drain water heater to change gas valve?
However, knowing where to start with replacing the gas valve can be a challenge. Removing and replacing a gas valve requires you to completely drain the water heater, turn off the gas control valve, turn off the gas and water supply.
Why do I need to replace my heater control valve?
During times when the air conditioner is in use, the heater control valve closes, preventing engine coolant from entering the heater core. The result is less heat in the passenger compartment, allowing the air conditioner to work more efficiently. Follow the step-by-step guide below for directions for replacing a faulty heater control valve.
Where is the heater control valve located on a car?
The heater control valve is a cooling and hvac system component that is commonly found on many road going cars and trucks. The heater control valve is typically mounted near the firewall, and acts as the valve that allows coolant to flow from the engine to the heater core, which is located inside of the vehicle.
What happens when a heater control valve gets stuck?
If the heater control valve breaks or gets stuck, the coolant flow to the heater core may be restricted or stopped completely. Without coolant flow to the heater core, the heater will not be able to produce warm air for the cabin.
How to check the temperature of a heater control valve?
Then check the temperature of the hose on the inlet and outlet sides of the heater control valve. The inlet and outlet hoses should be the same temperature. If the inlet side is warmer than the outlet side, the valve isn’t opening or opening fully. Remove the vacuum line from the vacuum motor and check for engine vacuum.
During times when the air conditioner is in use, the heater control valve closes, preventing engine coolant from entering the heater core. The result is less heat in the passenger compartment, allowing the air conditioner to work more efficiently. Follow the step-by-step guide below for directions for replacing a faulty heater control valve.
The heater control valve is a cooling and hvac system component that is commonly found on many road going cars and trucks. The heater control valve is typically mounted near the firewall, and acts as the valve that allows coolant to flow from the engine to the heater core, which is located inside of the vehicle.
What are the symptoms of a bad heater control valve?
Symptoms of a Bad or Failing Heater Control Valve. 1 1. Heater doesn’t work. One of the first symptoms of a faulty heater control valve is a heater that fails to produce warm air. If the heater control 2 2. Leaking coolant. 3 3. Erratic heater behavior.
What causes a heater control valve to leak?
Heater control valves can also leak from excessive corrosion from contact with old or contaminated engine coolant. Usually a leaking control valve will have to be replaced in order to repair the leak.