Can you start a motorcycle with the trickle charger attached?

Can you start a motorcycle with the trickle charger attached?

Charging the Motorcycle with a Trickle-Charger Using a trickle charger is similar to using a jump-starter, it just takes a little longer for the charge to rebuild. Remove the motorcycle’s seat to access the battery. Make sure your trickle-charger isn’t plugged into the outlet.

What should I do if my motorcycle battery wont start?

If the reading says anything close to or slightly below 12 volts, charge your battery and try starting your motorcycle again. If it has a really low number, such as 9 volts or below, then you battery is pretty much toast and you’ll need to purchase a new one.

Why does my motorcycle make no noise when I turn it on?

Depending on how low your battery is, if there is some voltage left you may be able to turn the key as well as turn on your blinker, but turning it over is slow and sluggish. If your battery is completely dead, you motorcycle will not make any noise at all when you try to start it.

What causes a motorcycle battery to drain while running?

When a stator has gone bad, that means the motorcycle is running off of battery power alone which will quickly drain it. Batteries were not made to power the bike while it’s running, only mainly to get it started.

What does the battery do on a motorcycle?

The battery’s main role on a motorcycle is to get it started. Unless you have additional electrical ad-ons, that’s basically all the battery does. Once the motorcycle is on, the stator takes over and is what helps the bike run while also recharging the voltage the battery had to use to get the motorcycle started.

If the reading says anything close to or slightly below 12 volts, charge your battery and try starting your motorcycle again. If it has a really low number, such as 9 volts or below, then you battery is pretty much toast and you’ll need to purchase a new one.

What should the voltage be on a motorcycle battery?

If everything looks ok, next is checking the voltage. You can DIY this or take your battery to a local shop or auto parts store to check it out. You’ll also want to load test the battery with a digital voltmeter, leaving it attached to the motorcycle. The voltage reading should range between 9.5 and 10.5 for about 30 seconds.

What happens when a motorcycle battery is dead?

If your battery is completely dead, you motorcycle will not make any noise at all when you try to start it. How a motorcycle battery dies: If a motorcycle battery is not used and just sits, it will lose it’s capacity to power your motorcycle. There is also a phenomenon called parasitic drain.

Depending on how low your battery is, if there is some voltage left you may be able to turn the key as well as turn on your blinker, but turning it over is slow and sluggish. If your battery is completely dead, you motorcycle will not make any noise at all when you try to start it.