Can you remove the clutch on a Yamaha G2?
Cutting the relief can cause some of the tighter parts to loosen up a little, and then you can remove the clutch easily. As mentioned in the previous sections, there are always signs telling you that your Yamaha G2 has a secondary clutch problem. If you want to know whether your clutch has some problems or not, look out for some signs or symptoms.
Which is the other half of the clutch system?
The other half of this clutch system is the driven, or secondary, clutch. At rest the driven clutch sheaves are spring loaded together, so the belt rides up at the outer edge of this clutch, NOT down near the center shaft.
What’s the part number on a hydralic clutch?
I didnt tear it apart but its not like cable operated, you remove pressure plate, then disc and reinstall. part number from Harley is Part Number 37000287 There is no adjusting. Anybody using any clutches other then stock hydralic, Lets here whats available out there.
What happens to clutch on old Harley Davidson?
In the old Harleys sometimes a groove wears so deep that hairline cracks develop in the soft sheave face and oil bleeds through contaminating the belt and creating excessive belt slippage. Today the clutch systems are quite reliable but as they age all kinds of strange things can happen.
Cutting the relief can cause some of the tighter parts to loosen up a little, and then you can remove the clutch easily. As mentioned in the previous sections, there are always signs telling you that your Yamaha G2 has a secondary clutch problem. If you want to know whether your clutch has some problems or not, look out for some signs or symptoms.
How to adjust hydraulic clutch on Harley Davidson?
Best I can tell having never worked on a hydraulic clutch before (but understanding hydraulics), the pros here already gave you a starting point. Make sure the clutch adjustment is correct. Lightly seat the adjuster screw on the clutch, back out however many turns the manual says, lock it down.
I didnt tear it apart but its not like cable operated, you remove pressure plate, then disc and reinstall. part number from Harley is Part Number 37000287 There is no adjusting. Anybody using any clutches other then stock hydralic, Lets here whats available out there.
Can a stock clutch assembly be installed on a Harley?
It withstands the most extreme conditions where the stock Harley clutch assembly falls short, or down right fails. Before installing the Barnett assembly, we have to get into this drive and put the stock assembly on the bench.