Can you make a SOHC to DOHC?
no, you cannot convert an sohc to dohc…
Can a 6 bolt engine be converted to DOHC?
It is possible to put an EvoIV-IX head on a 7 bolt engine, but will be difficult to do on a 6 bolt due to the lack of oil drains. Below is a picture you can use to compare the 6 bolt head, gasket and block. All holes line up. Obviously, going SOHC to DOHC changes the timing belt configuration a bit. Lets start by listing what parts are different.
What kind of engine is a DOHC engine?
DOHC, also known as Twin Cam, is the other type of engine whose popularity is increasing due to its efficiency. The Dual Overhead Cam engines work either with the V-shapes or inline engines. They are, however, more commonly used with the Vs. The two camshafts in this engine reside over the heads.
Can a 1g Head be put on a 7 bolt engine?
For 6 bolt blocks and heads, there is no need to drill any holes in the head, block or gasket. If you are putting a 1G head on a 7 bolt or Evo block, you will need to block some oil drain holes. It is possible to put an EvoIV-IX head on a 7 bolt engine, but will be difficult to do on a 6 bolt due to the lack of oil drains.
How many camshafts does a DOHC V8 have?
Q: How Many Camshafts Does a DOHC v8 Have? Ans: The DOHC v8 has four camshafts. Dual Over Head Camshaft means that each cylinder has two camshafts at the top of the engine head. Engines that have more than a single cylinder bank like the V8 and V6 have two camshafts per cylinder head.
It is possible to put an EvoIV-IX head on a 7 bolt engine, but will be difficult to do on a 6 bolt due to the lack of oil drains. Below is a picture you can use to compare the 6 bolt head, gasket and block. All holes line up. Obviously, going SOHC to DOHC changes the timing belt configuration a bit. Lets start by listing what parts are different.
For 6 bolt blocks and heads, there is no need to drill any holes in the head, block or gasket. If you are putting a 1G head on a 7 bolt or Evo block, you will need to block some oil drain holes. It is possible to put an EvoIV-IX head on a 7 bolt engine, but will be difficult to do on a 6 bolt due to the lack of oil drains.
What are the castings for a 4.6 SOHC engine?
If you’re building a 4.6 SOHC engine, you need to know there are two basic Windsor block castings, and four basic Romeo block castings. It’s a good idea to keep Windsor heads with Windsor blocks, and Romeo heads with Romeo blocks to eliminate any confusion in your engine build.
Can a 4G63 engine be converted to DOHC?
The 4G63’s heads have been modified to make well over 1000hp. They are quite a nice piece to work with. It is a belt driven twin cam head with four valves per cylinder. It has a great pent roof combustion chamber with good quench areas on the sides. This page describes what is necessary to convert a SOHC engine to DOHC.