Are C300 Mercedes reliable?
The Mercedes-Benz C300 Reliability Rating is 3.5 out of 5.0, which ranks it 13th out of 31 for luxury midsize cars. While repairs are more common, these issues are less likely to be severe than with other cars.
What is a flex disk on a Mercedes?
A flex disc, also known as a giubo, is a coupling device made from hard rubber. Input and output shafts flanges are mounted on to the Mercedes flex disk on both sides. The transmission shaft, differential, and drive shaft are not directly interconnected. Rather, they connect via a flex disk.
How to change the shaft on a Mercedes driveshaft?
To get to the top bolts, you will need to lift the wheels at front or back, depending on which shaft you are changing, to turn the shaft. If you have to put the car on neutral to spin the driveshaft, do so without getting under the car. Put the car back in Park and set the Parking brakes before you get back under the vehicle.
How to replace propeller shaft on Mercedes 4Matic?
On vehicles with 4Matic, it connects the transfer case to the front and rear differential, which means all-wheel drive cars will have two propeller shafts. Jack up the car. Secure the vehicle with jack stands and place wheel chocks behind the wheels that remain on the ground. Remove the splash shield.
How do you replace a flex disc in a Mercedes?
Replacing the rear flex disc follows the same rule. But when removing it, start with unbolting the ones connected to the driveshaft. When the driveshaft has dropped a little, unbolt the ones that are connected to the differential. Putting the new one back follows these steps in reverse order.
What kind of coupling device is Mercedes flex disc?
A flex disc or a giubo is a coupling device made of hard rubber. Input and output shaft flanges are bolted to the Mercedes Flex Disk on either side (see picture below).
To get to the top bolts, you will need to lift the wheels at front or back, depending on which shaft you are changing, to turn the shaft. If you have to put the car on neutral to spin the driveshaft, do so without getting under the car. Put the car back in Park and set the Parking brakes before you get back under the vehicle.
How much does it cost to replace a CV axle on a Mercedes C300?
Mercedes-Benz C300 CV Axle / Shaft Assembly Replacement costs $797 on average. What are CV Axles and how do they work? All front wheel drive and all wheel drive cars use CV axles.
On vehicles with 4Matic, it connects the transfer case to the front and rear differential, which means all-wheel drive cars will have two propeller shafts. Jack up the car. Secure the vehicle with jack stands and place wheel chocks behind the wheels that remain on the ground. Remove the splash shield.
Replacing the rear flex disc follows the same rule. But when removing it, start with unbolting the ones connected to the driveshaft. When the driveshaft has dropped a little, unbolt the ones that are connected to the differential. Putting the new one back follows these steps in reverse order.