Why do you need a track bar on a Jeep Wrangler?
What is a Track Bar and Why Would You Want To Upgrade It? A track bar connects the body of your Jeep to the opposite wheel knuckle and acts a centering force for the front or rear axle. Generally, you’ll want to upgrade your track bar or purchase a relocation bracket when you lift your rig to keep all of the suspension geometry aligned.
What makes a Jeep Wrangler different from other jeeps?
Also, it comes equipped with 16-inch steel wheels, a 3.45 axle gear ratio, and a stable standard duty suspension. A Third generation Dana® solid front and rear axle and Command-Trac 4WD system further make up the interior difference for the Wrangler Sport.
How much does a 2002 Jeep Wrangler weigh?
Curb weight: 3,316 lbs. Gross vehicle weight: 4,450 lbs. Max cargo capacity: 55 cu.ft. Payload: 800 lbs.
Which is the best rear axle for a Jeep Wrangler?
The Dana 30 will only be found as a Jeep front axle while the Dana 35 will only be found as a rear axle on Wranglers. Dana 35 axles have earned a very poor reputation in the off-roading world, however, it is a great axle for stock Wranglers.
Do you need adjustable track bars on a Jeep Wrangler?
With lifted Jeeps, adjustability is a necessity, if you’re not using a relocation bracket, to keep your axle centered. This is what adjustable track bars accomplish. Lifted Jeeps require longer track bars while normal Wranglers can stick to the regular length bars.
What causes the track bar to wobble on a Jeep Wrangler?
Preventing Death Wobble & Jeep Wrangler Track Bar Replacement. The Jeep Wrangler death wobble refers to a vibration that can be caused by your track bar bushings, collars, or brackets which makes the axle want to free itself from your Wrangler. Check out the track bar bushings.
Curb weight: 3,316 lbs. Gross vehicle weight: 4,450 lbs. Max cargo capacity: 55 cu.ft. Payload: 800 lbs.
What are the bushings on a Jeep Wrangler?
The bushings, usually polyurethane, are made to preserve the track bar, allowing some flex between the collar and the track bar. If your bushings are old and dry rotted, they will not be doing any good. The bushings may provide excessive flexing of the track bar and cause the dreaded death wobble. The collars separate the bolt from the bushing.
How tall is a 2004 Jeep Wrangler Unlimited?
The 2004 1/2 Wrangler Unlimited was under 70 inches wide (not including mirrors), 167 inches long, and 70.9 inches tall with the soft top.
How big is the rear axle on a Jeep Wrangler?
The YJ Dana 30 hold a reverse cut ring and pinion, but the TJs do not. Both TJs and YJs, however, use a 5×4.5 inch bolt pattern. Dana 35: This was an axle size used on most Jeep rear axles. They had a ring gear diameter of 7 and 9/16 inches. They came with either a 3.21 or 4.10 gear ratio.
The bushings, usually polyurethane, are made to preserve the track bar, allowing some flex between the collar and the track bar. If your bushings are old and dry rotted, they will not be doing any good. The bushings may provide excessive flexing of the track bar and cause the dreaded death wobble. The collars separate the bolt from the bushing.
Where do you put track bar on Jeep Wrangler?
Always follow installation instructions that come with your track bar, but as a summary, adjusting and installing a track bar is pretty easy. Adjustable bars will have a sleeve, so you don’t have to remove the track bar ends. You’ll want the adjustable end at the axle side.
Why do I need a short track bar on my Jeep?
When upgrading your suspension by adding a lift kit, the added height will throw off the alignment of your track bar, shifting it left or right of center (a short track bar will shift the front axle assembly to the driver side – one that’s too long will shift your front axle to the passenger side).
What kind of drive does a Jeep Wrangler have?
The system is better utilized during high on-road speeds. Jeeps use a 4WD (four-wheel drive) system which is an older and more mechanical drivetrain. Normally Jeeps are rear wheel drive trucks. The driver can manually engage the transfer case to engage the front differential. The power is delivered to opposed wheels.
What kind of drivetrain does a Wrangler have?
A Wrangler’s drivetrain is its bread and butter. That said, there is always room for improvement, or to hone it to your off-road needs. Stronger axles, different gear ratios, and even a tougher differential will help you tackle more difficult trails. Wranglers are known to have a terrain capable and rugged drivetrain.
How much torque does a 2003 Jeep Wranglers have?
These are all the torque settings that I have at the moment for the 2003 Jeep Wranglers. Ft. Lbs. In. Lbs. Ft. Lbs. In. Lbs. Ft. Lbs. In. Lbs. Ft. Lbs. In. Lbs. Condenser to Radiator Bolts Coolant Overflow Bottle to Plenum mounting bolts – 2.4L only Coolant Pressure Bottle to Plenum mounting bolts Electric Fan to Fan Shroud bolts Ft. Lbs.
What kind of track bar do you need on a Jeep Wrangler?
Lifted Jeeps require longer track bars while normal Wranglers can stick to the regular length bars. Make sure you get the right track bar length/adjuster that is compatible with your lift size. After removing the old track bar and before installing the new one, you need to center the axle.
Why are my JK track bar not working?
We know JKs have a problem with incorrect bolt sizing as they came with a slightly smaller bolt then the inside diameter of the collar used. This incredibly small difference in size, over time, has destroyed JK track bar bolts and collars. Upgrading to new, improved, and correct sized bolts and collars is essential to keep your JK on the road.