How do you fix a Jeep Grand Cherokee heater?
Install the cutout plastic housing back into place and seal with provided foam tape. Install drive motor and screws (or clip). Close glove box and reinstall rubber stop tabs. Lifetime warranty against defects or failure of our product. Save hundreds of dollars and fix your Jeep® Heater at the same time. system. If they do not respond, disconnect
How to diagnose and replace Jeep Grand Cherokee blend doors?
This video shows you how to Diagnose and Replace the Blend Doors in a 1999-2004 Jeep Grand Cherokee. Make sure that your specify if your vehicle has two heat zones or just one. New part we installed is designed for one heat zone. This is why it was not necessary to reinstall the blend door partition.
How to regulate between heat and AC in Jeep Cherokee?
You can grasp the axle with your fingers and feel the extents of movement of the door by turning the knob. You should be able to manually regulate between heat and AC by turning the axle. The door should hit a hard stop point when you turn it to heat or AC and not have any play beyond that point.
Where do you change the radiator on a jeep?
All work is done from the foot area of the passenger side of the Jeep, with a Dremel cut in the bottom of the heater box…no removal of the dash panel or evacuating the AC system and draining the radiator. Once completed, the alterations are under the dash panel in the foot area and are not visible.
Install the cutout plastic housing back into place and seal with provided foam tape. Install drive motor and screws (or clip). Close glove box and reinstall rubber stop tabs. Lifetime warranty against defects or failure of our product. Save hundreds of dollars and fix your Jeep® Heater at the same time. system. If they do not respond, disconnect
What is code for Jeep Grand Cherokee heater blend door?
This method involves a little disassembly but is a great way to ensure our Jeep® Heater aluminum blend doors are the right solution for you. The code numbers will be displayed on the screen one at a time. 22 or 54 – Left temperature door is broken or 47 – motor not responding.
What to do if your Jeep Grand Cherokee blend door fails?
The cheap plastic shafts can not stand the force in blend door failure. That equals a blocked heater core and loss of heat. Start the Jeep® and turn on the AC. Manually switch between heat and AC by turning the axle left and right with your fingers. If there is no change repair kit is your solution.
Is the air conditioner working on a 1999 Grand Cherokee?
Conditioning is working on cold but not hot no matter the control knobs setting. Our single zone control can be used on ALL 1999 – 2004 Grand Cherokee® vehicles! On models with dual zone