What kind of axle does a jeep Dana use?
To get an idea of the whole differential end to end, here’s a TeraFlex Tera 30 Heavy Duty Front Replacement Axle Housing (Part TF-3503004). Note how the ends are made to accept spindles. The Dana 44 has been used on the front and rear of Jeeps.
Can a ZJ Grand Cherokee have a Dana 44?
Some XJ Cherokees have the Dana 44, but its a pretty rare occurrence. ZJ Grand Cherokees with the V8 engine have a Dana 44 rear end, and some of the 4.0-liter ZJ with a tow package do too.
Which is better Dana 44 or Dana 35 rear end?
ZJ Grand Cherokees with the V8 engine have a Dana 44 rear end, and some of the 4.0-liter ZJ with a tow package do too. For TJ Wranglers it was a factory option if you got the 4.0-liter engine. Obviously, the Dana 44 is better than the Dana 35, but what are the differences that make the D44 stronger?
Which is the best axle for a jeep?
The Dana 44 was one of the most common axles found under Jeep vehicles throughout the years. They’re highly sought after now for their increased strength over factory axles such as the Chrysler 8.25, Dana 35, and Dana 30, and will hold up against 35″ tires, making them a highly demanded upgrade for Jeep owners looking to go big.
To get an idea of the whole differential end to end, here’s a TeraFlex Tera 30 Heavy Duty Front Replacement Axle Housing (Part TF-3503004). Note how the ends are made to accept spindles. The Dana 44 has been used on the front and rear of Jeeps.
What is the rear axle ratio for a 2000 Jeep Cherokee?
There are 8 choices for the 2000 Jeep Cherokee Rear Axle Assembly !!! Choose Your Option. Chrysler manufactured (8-1/4) 3.07 ratio. Chrysler manufactured (8-1/4) 3.55 ratio.
Some XJ Cherokees have the Dana 44, but its a pretty rare occurrence. ZJ Grand Cherokees with the V8 engine have a Dana 44 rear end, and some of the 4.0-liter ZJ with a tow package do too.
The Dana 44 was one of the most common axles found under Jeep vehicles throughout the years. They’re highly sought after now for their increased strength over factory axles such as the Chrysler 8.25, Dana 35, and Dana 30, and will hold up against 35″ tires, making them a highly demanded upgrade for Jeep owners looking to go big.
What kind of axle does a Jeep Wrangler JK have?
TJs come with a Dana 30 or a Dana 44 in the front and either a Dana 35 or a Dana 44 in the rear. Typically the Sport and Sahara models include the Dana 30-Front/Dana 35-Rear. 2007-2018 Jeep Wrangler JK
What kind of differential does a jeep TJ have?
Jeep introduced the inaugural Rubicon trim level on the 2003 TJ, geared toward off-roaders. Rubicon’s came standard with locking front and rear differentials. TJs come with a Dana 30 or a Dana 44 in the front and either a Dana 35 or a Dana 44 in the rear. Typically the Sport and Sahara models include the Dana 30-Front/Dana 35-Rear.
What kind of car is a Dana Wrangler?
Typically the Sport and Sahara models include the Dana 30-Front/Dana 35-Rear. The 3rdgeneration JK was the first model to offer the Unlimited 4-Door version and retained its off-road features of roll bars, removable doors and fold-down windshield.
Which is the best rear axle for a Jeep Wrangler?
The Dana 30 will only be found as a Jeep front axle while the Dana 35 will only be found as a rear axle on Wranglers. Dana 35 axles have earned a very poor reputation in the off-roading world, however, it is a great axle for stock Wranglers.
Typically the Sport and Sahara models include the Dana 30-Front/Dana 35-Rear. The 3rdgeneration JK was the first model to offer the Unlimited 4-Door version and retained its off-road features of roll bars, removable doors and fold-down windshield.
Jeep introduced the inaugural Rubicon trim level on the 2003 TJ, geared toward off-roaders. Rubicon’s came standard with locking front and rear differentials. TJs come with a Dana 30 or a Dana 44 in the front and either a Dana 35 or a Dana 44 in the rear. Typically the Sport and Sahara models include the Dana 30-Front/Dana 35-Rear.
What kind of parts do I need for a Dana 300?
If you are looking for OEM Jeep Replacement Dana Spicer Model 300 Transfer Case Parts or want to upgrade your CJ dana 300 parts we have everything from output shafts, bearings, yokes and seals that you will need!
What kind of transfer case does Dana 300 use?
While not any stronger than straight cut gears, they allowed the transfer case to run quieter in its low range. The Dana 300 is a cast iron transfer case, having a passenger-side front output and a centered rear output. It has a round, six-bolt front mounting face.
What’s the difference between Dana 300 and Jeep 300?
Gear shifting between ranges and modes in the 300 is handled differently than the previous Dana boxes, which used a sliding gear and a sliding clutch. The 300 uses sliding clutch rings for both. The front input flange for Jeep versions is round and uses six 3/8″ mounting bolts through to the transmission flange.
While not any stronger than straight cut gears, they allowed the transfer case to run quieter in its low range. The Dana 300 is a cast iron transfer case, having a passenger-side front output and a centered rear output. It has a round, six-bolt front mounting face.
If you are looking for OEM Jeep Replacement Dana Spicer Model 300 Transfer Case Parts or want to upgrade your CJ dana 300 parts we have everything from output shafts, bearings, yokes and seals that you will need!
What is stock rotation of Jeep Dana 300?
The Jeep Dana 300 has a stock rotation of approximately 35 degrees. All of the adapters we manufacture for this transfer case have the provisions for this rotation. Most of the adapters have two sets of six adapter-to-transfer case mounting holes.
Is the rear axle of a 2000 Jeep Cherokee OEM?
This is an original used OEM Rear Axle Assembly that’s guaranteed to fit a 2000 Jeep Cherokee with the applicable vehicle manufacturer’s specifications (). CHRYSLER (8-1/4), 3.55 RATIO We offer an industry leading 1-year warranty on every part type we sell.
How to tell the difference between a Chrysler 8.25 and a Dana 35?
The easiest way to tell which axle you have is to look at the bottom of the differential. If there a flat section on the bottom, about 3-4 inches wide then you have a Chrysler 8.25. If the bottom of the differential is completely round you have a Dana 35.
What kind of rear axle does a Dana 35 have?
All YJ Wranglers came equipped with a Dana 35 because there wasn’t any other option for a rear axle. TJ Wranglers came with either a Dana 35 or a Dana 44 but never came with a Chrysler 8.25.
What kind of rear axle does a jeep have?
Most Jeeps in the 90s came with three types of rear axles: Chrysler 8.25, Dana 35 or Dana 44.
What kind of rear axle does a Chrysler 8.25 have?
All YJ Wranglers came equipped with a Dana 35 because there wasn’t any other option for a rear axle. TJ Wranglers came with either a Dana 35 or a Dana 44 but never came with a Chrysler 8.25. The Dana 35 has earned a pretty poor reputation in the off-road world.