How do you reset the change oil light on a 2000 Jeep Grand Cherokee?
How To Reset Jeep Grand Cherokee Oil Life Light in 4 Easy Steps!
- Turn the key to ON/RUN position with engine off.
- Fully depress and release the accelerator pedal 3 times within 10 seconds.
- Turn the key to the OFF position and then back on to confirm reset was accepted.
How to reset the oil service light on a Jeep Grand Cherokee?
fully depress the accelerator pedal slowly three times within 5 seconds and the OIL LIFE is reset Turn off the ignition, then start the engine normally and the light should be reset. About Jeep Grand Cherokee The Jeep Grand Cherokee is a range of mid-size SUV’s produced by the American manufacturer Jeep.
How to do an oil change on a Jeep Wrangler?
Use the NAVIGATION button (located on the steering wheel) and select VEHICLE INFO. Find the REMAINING OIL LIFE. Finally, hold down the OK button until the “Oil Life” display changes to 100 percent. Turn the ignition off and start the engine to verify the indicator has been reset.
How do I reset the oil service light?
The oil reset is complete. YOU CAN ALSO RESET THE OIL LIFE USING THE TUTORIAL BELOW. Close all doors. Set the gear to the PARK position. Turn ignition to RUN position, don’t start the engine. Turn off the ignition, then start the engine normally and the light should be reset.
fully depress the accelerator pedal slowly three times within 5 seconds and the OIL LIFE is reset Turn off the ignition, then start the engine normally and the light should be reset. About Jeep Grand Cherokee The Jeep Grand Cherokee is a range of mid-size SUV’s produced by the American manufacturer Jeep.
How to reset maintenance light on Jeep Wrangler?
1 Close all doors, gear in Park position. 2 Turn the ignition to RUN position, don’t start the engine. 3 Use the NAVIGATION button, navigate to VEHICLE INFO then scroll to REMAINING OIL LIFE. 4 Turn of the ignition.
Use the NAVIGATION button (located on the steering wheel) and select VEHICLE INFO. Find the REMAINING OIL LIFE. Finally, hold down the OK button until the “Oil Life” display changes to 100 percent. Turn the ignition off and start the engine to verify the indicator has been reset.
The oil reset is complete. YOU CAN ALSO RESET THE OIL LIFE USING THE TUTORIAL BELOW. Close all doors. Set the gear to the PARK position. Turn ignition to RUN position, don’t start the engine. Turn off the ignition, then start the engine normally and the light should be reset.