How to diagnose and replace Jeep Grand Cherokee blend doors?
This video shows you how to Diagnose and Replace the Blend Doors in a 1999-2004 Jeep Grand Cherokee. Make sure that your specify if your vehicle has two heat zones or just one. New part we installed is designed for one heat zone. This is why it was not necessary to reinstall the blend door partition.
Do you have to remove dash to replace blend doors?
The tech manuals say you have remove the entire dash to replace the blend doors; you do unless you are willing to make a simple cut with the Dremel tool. Here’s what was going on with my WJ A/C: Sometimes it would be cold, sometimes it would be hot, sometimes driver side was cold but passenger side was hot.
How to replace hot cold blend door actuator driver?
DMurph simplifies the cooking process so you can prepare your favorite recipes like a top chef. Also, we have a coffee playlist for making popular espresso drinks like a true barista. We show you how to make easy, flavorful recipes that you, your family, and friends can savor time and time again!
Why are the doors on my Grand Cherokee not working?
It was a jagged break, so sometimes both doors would catch each other and work properly. Most of the time 1 door would get stuck in a mid position, blending hot air and cold air. Here’s a picture comparing the broken, OEM plastic doors and the new metal doors I ordered.
How to remove the blend door actuator on a jeep?
Remove the lower portion of the heater duct. You can now visually inspect the blend door actuator up against the center console, attached to the blend box, but the screws will seem impossible to remove! To get to those screws, you must remove the upper portion of the heater duct. It’s made as a clam shell so it comes apart in two pieces.
Why are there two blend doors on my Grand Cherokee?
All this was indicative of a blend door failure. The Grand Cherokees have two blend doors. Even ones like mine that do NOT have dual climate control, they still have a driver and passenger blend door. Only difference is the doors are attached to each other. So I removed the glove box and looked at the blend door actuator.
Where is the actuator on a 2009 Jeep Laredo?
If anyone needs to do this on a 2009 Grand Cherokee Laredo with the single A/C system (not two sided) here is what I found out in getting it done yesterday and today. 1) the actuator is on the driver side to the right of the steering column.
The tech manuals say you have remove the entire dash to replace the blend doors; you do unless you are willing to make a simple cut with the Dremel tool. Here’s what was going on with my WJ A/C: Sometimes it would be cold, sometimes it would be hot, sometimes driver side was cold but passenger side was hot.
How to fix second door on Jeep Cherokee?
Install the second door, sliding the connector pin into the far side of the second door. Align and snap in the near connector. Reinstall the near actuator and test.
Is there a problem with my Jeep Grand Cherokee?
That being said, when I didn’t have heat in my Jeep Grand Cherokee (JGC) during our first cold snap I naturally went online to diagnose and solve the problem. What I discovered was this is a very common problem with my model of JGC (1999-2004).
This video shows you how to Diagnose and Replace the Blend Doors in a 1999-2004 Jeep Grand Cherokee. Make sure that your specify if your vehicle has two heat zones or just one. New part we installed is designed for one heat zone. This is why it was not necessary to reinstall the blend door partition.
What is blend door actuator for Jeep Grand Cherokee?
For information on how to diagnose your blend door problem as well as detailed product information, please click on the products below or use the “Shop” button above. JEEP OEM PART #5143183AA Blend Door Actuator to Blend Door Drive Shaft NOW AVAILABLE – See below or click on the “SHOP” button above.
Install the second door, sliding the connector pin into the far side of the second door. Align and snap in the near connector. Reinstall the near actuator and test.
Do you need a new blend door actuator?
If the black actuator to blend door drive shaft itself is broken, you will need a new actuator to blend door shaft, which has been discontinued by Jeep but is also available from us on the product page. We also do stock OEM blend door actuators.
How can I Fix my Jeep Grand Cherokee?
Follow me for an adventure of a lifetime: Twitter: OmegaGreedAK47 Instagram: OmegagreedAK47 Check out my Website http://www.geekswithcars.com/ First Time Off-Roading in my STOCK Jeep Wrangler JLU! // Jeep JL Off Roading Rowher Flats OHV An error occurred while retrieving sharing information.
How big is the cargo area in a 1999 Jeep Laredo?
Interior Front head room 40 ” Rear leg room 35.3 ” Luggage capacity 39.0 cu.ft. Maximum cargo capacity 72.3 cu.ft. Standard seating 5
How tall is the Jeep Grand Cherokee Laredo?
Exterior Length 181.5 ” Body width 72.3 ” Body height 69.4 ” Wheelbase 105.9 ” Curb 4,130 lbs.
How big is a 1999 Jeep Grand Cherokee?
20.5 gal. Many sport-utility buyers like to plant their right feet deep into the accelerator and feel instantaneous movement. Do this in Jeep’s redesigned ’99 Grand Cherokee Limited and it takes off a bit slower than last year’s model.
How do you install a Grand Cherokee door?
Install the cutout plastic housing back into place and seal with provided foam tape. Install drive motor and screws (or clip). Close glove box and reinstall rubber stop tabs. Lifetime warranty against defects or failure of our product.
How do you install a front heater on a Grand Cherokee?
You should be excited, but don’t celebrate just yet – there’s work to do. Start with installing the rear Heater door. Align keyed shaft and slide into place. DOOR INTO POSITION! Instead – complete the AZC System recalibration process. This will cause the motor to spin the pin around into position.
What should I do if my blend door fails?
The standard fix for the blend door failure is to remove the heater box and replace the plastic door. If the instructions with other fixes start out with “remove the heater box”, be ready for considerable work.
Install the cutout plastic housing back into place and seal with provided foam tape. Install drive motor and screws (or clip). Close glove box and reinstall rubber stop tabs. Lifetime warranty against defects or failure of our product.
You should be excited, but don’t celebrate just yet – there’s work to do. Start with installing the rear Heater door. Align keyed shaft and slide into place. DOOR INTO POSITION! Instead – complete the AZC System recalibration process. This will cause the motor to spin the pin around into position.
Where is the Top Gear on a Jeep Grand Cherokee?
That gear can only be installed in 1 position, as shown. That top gear is in the position shown, with the blend door in the down position. That gear needs to rotate counter clockwise about a quarter turn to open the blend door. But you can’t rotate the gear that far without it hitting the top housing.
What is code for Jeep Grand Cherokee heater blend door?
This method involves a little disassembly but is a great way to ensure our Jeep® Heater aluminum blend doors are the right solution for you. The code numbers will be displayed on the screen one at a time. 22 or 54 – Left temperature door is broken or 47 – motor not responding.
How long does it take to repair a Jeep Grand Cherokee heater?
The hardest thing to do is make the first cut. This job will take between 30 – 45 minutes for most people. JGCParts Heater Dual Zone blend doors for all 1999 – 2004 Jeep® Grand Cherokee®. The easiest, cheapest way to fix and restore heat to your Jeep. 1999 – 2004 Grand Cherokee®.
Is there a door lock on a Jeep Grand Cherokee?
99-04 Jeep Grand Cherokee Door locks-Door Switch-electric windows not working. – YouTube 99-04 Jeep Grand Cherokee Door locks-Door Switch-electric windows not working. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.
Is there an issue with my Jeep Grand Cherokee power window?
Jeep Grand Cherokee power window issue Fixed! – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
What did Edmunds say about the 2004 Jeep Grand Cherokee?
Edmunds’ expert review of the Used 2004 Jeep Grand Cherokee provides the latest look at trim-level features and specs, performance, safety, and comfort. At Edmunds we drive every car we review, performing road tests and competitor comparisons to help you find your perfect car.
What are the trim levels of the 2004 Jeep Grand Cherokee?
2004 Jeep Grand Cherokee models The Grand Cherokee now comes in six trim levels: Laredo, Limited, Freedom Edition, Special Edition, Overland and Columbia Edition.
What are the repairs on a 2004 Jeep Grand Cherokee?
Only major repairs is a transmission solenoid about 450 at 160k miles, fuel pump at 90k miles (ran the gas too low for a long period of time my own fault). Other than that change all fluids when your supposed to and has been a good reliable vehicle for me. I purchased my Rocky Mountain Edition as a dealer demo.
What kind of seats does a 2004 Jeep Grand Cherokee have?
2004 Jeep Grand Cherokee models. The Grand Cherokee now comes in six trim levels: Laredo, Limited, Freedom Edition, Special Edition, Overland and Columbia Edition. Standard features on the Laredo include a six-way power driver seat and 60/40-split folding rear seats with folding head restraints.
What are the symptoms of a Grand Cherokee heater blend door?
The usual symptoms are that one side of the cabin will loose heat, followed by the other side at some point. Air Conditioning is working on cold but not hot no matter the control knobs setting. These have automatic zone control and the driver and passenger sides have individual controls. Close the glove box – Your Done! It’s really that easy!
Where is the blend door motor located on a jeep?
There is no electronic diagnosis available for your Jeep®. Physically check the operation of the blend doors by removing the glove box. Remove the blend door motor which is located to the side of the opening. The motor is held in place with two Phillips screws.
What kind of heater does a 1999 Jeep Grand Cherokee use?
JGCParts Heater Dual Zone blend doors for all 1999 – 2004 Jeep® Grand Cherokee®. The easiest, cheapest way to fix and restore heat to your Jeep. 1999 – 2004 Grand Cherokee®. The sure way to fix and restore heat to your Jeep®. Make the smart choice.
The usual symptoms are that one side of the cabin will loose heat, followed by the other side at some point. Air Conditioning is working on cold but not hot no matter the control knobs setting. These have automatic zone control and the driver and passenger sides have individual controls. Close the glove box – Your Done! It’s really that easy!
There is no electronic diagnosis available for your Jeep®. Physically check the operation of the blend doors by removing the glove box. Remove the blend door motor which is located to the side of the opening. The motor is held in place with two Phillips screws.
This method involves a little disassembly but is a great way to ensure our Jeep® Heater aluminum blend doors are the right solution for you. The code numbers will be displayed on the screen one at a time. 22 or 54 – Left temperature door is broken or 47 – motor not responding.
The hardest thing to do is make the first cut. This job will take between 30 – 45 minutes for most people. JGCParts Heater Dual Zone blend doors for all 1999 – 2004 Jeep® Grand Cherokee®. The easiest, cheapest way to fix and restore heat to your Jeep. 1999 – 2004 Grand Cherokee®.
JGCParts Heater Dual Zone blend doors for all 1999 – 2004 Jeep® Grand Cherokee®. The easiest, cheapest way to fix and restore heat to your Jeep. 1999 – 2004 Grand Cherokee®. The sure way to fix and restore heat to your Jeep®. Make the smart choice.
How long does it take to replace blend door?
The work could easily be done by any local independent garage. Product returns are accepted within two weeks for a full refund (minus shipping). The standard fix for the blend door failure is to remove the heater box and replace the plastic door.
How much does a Jeep Grand Cherokee door actuator replacement cost?
The average cost for a Jeep Grand Cherokee HVAC blend door actuator replacement is between $467 and $572. Labor costs are estimated between $405 and $511 while parts are priced at $62. This range does not include taxes and fees, and does not factor in your specific model year or unique location.
The work could easily be done by any local independent garage. Product returns are accepted within two weeks for a full refund (minus shipping). The standard fix for the blend door failure is to remove the heater box and replace the plastic door.
Why are my power windows not working on my Jeep Grand Cherokee?
While some other SUVs were manufactured with body-on-frame construction, the Jeep Grand Cherokee has always used a unibody chassis. Why won’t my power Windows work? I have a 1999 jeep grand Cherokee with the v8 engine and none of my Windows will go up or down.
What can you do with a Jeep Grand Cherokee?
The Jeep Grand Cherokee is able to carry the whole family and all the gear necessary for a camping trip in the Rockies, or a trip to the urban jungle with the greatest of ease. Boasting superior off-road abilities coupled with fabulous on-road maneuvering the Jeep Grand Cherokee is a unique vehicle well suited to any lifestyle.
What kind of car is the Jeep Grand Cherokee?
The Jeep Grand Cherokee is a mid-sized sport utility vehicle best known for its rugged design and roomy interior. The Jeep Grand Cherokee is able to carry the whole family and all the gear necessary for a camping trip in the Rockies, or a trip to the urban jungle with the greatest of ease.
What’s the difference between old and new blend door motor?
The old blend door motor had a black shaft where the gear is mounted and the new motor, which the dealer installed has a white shaft, where the gear is mounted. Can anybody help me in solving the issue? I have a problem with the blend door motor on the driver side in my Jeep Grand Cherokee 2014.
How can I tell if my heater blend doors have failed?
to see if your heater blend doors have failed. If you have no heat on the drivers side – this test will work for you. If you only have no heat on the passenger side only, please use the electronic method outlined above. Please follow the steps below. This method involves a little disassembly but is a great way to ensure our Jeep®
How does the blend door actuator work in a car?
In a vehicle’s heating and cooling system, the blend door actuators help control the air temperature from the vents, and direct air to selected vents. How does the blend door actuator work? To blow heat into the cabin, the blower motor sends air through the heater core and on through the dash vents.
to see if your heater blend doors have failed. If you have no heat on the drivers side – this test will work for you. If you only have no heat on the passenger side only, please use the electronic method outlined above. Please follow the steps below. This method involves a little disassembly but is a great way to ensure our Jeep®
What kind of car is a Jeep Wrangler?
Follow me for videos on my 2017 Ford Focus RS & the 2020 Hyundai Veloster N (Previously: 2017 Dodge Challenger RT, 2005 Jeep Grand Cherokee WK lifted, 2010 Jeep Wrangler Unlimited Sport (JKU)), and daily life driving it and living with it. I also make videos on the things I like: Motorcycles, Toy, Ferrets, Video Games, Cars, TV/Movies, and VLOGS!
Is there a fix for my Jeep Grand Cherokee?
To avoid this, cancel and sign in to YouTube on your computer. Follow me for videos on my 2017 Ford Focus RS & the 2020 Hyundai Veloster N (Previously: 2017 Dodge Challenger RT, 2005 Jeep Grand Cherokee WK lifted, 2010 Jeep Wrangler Unlimited Sport (JKU)), and daily life driving it and living with it.
Is the Jeep Grand Cherokee a registered trademark?
Jeep® and Grand Cherokee® are registered trademarks of Chrysler Group LLC. JGCParts is not in any way associated with Jeep® or Chrysler Group LLC.
How do you change AZC on a Jeep Grand Cherokee?
Set the AZC to automatic. 3. Turn the ignition off. 4. Remove the IOD fuse (Large 50 amp fuse #15 JB) from the Power Distribution Center. Wait 30 seconds, and then reinstall it. 5. Turn the ignition on. Do not touch any of the Heater / AC / AZC controls for at least 2 minutes to allow the calibration function to run entirely.
How to disassemble a Jeep Grand Cherokee dashboard?
Remove the final retainer bolt positioned on top of the brake pedal in a similar fashion.Slide the dash towards you and disconnect the electrical connectors going into the back side of the dash. Drag the dash up and carry it out of your Jeep. “Jeep Grand Cherokee 1993 thru 2004: All Models; Haynes Repair Manual”; John Haynes; 2004
Can you replace the interior door handle on a Jeep Grand Cherokee?
Door seal weatherstripping can be attached to the door or the body of the vehicle… HELP!™ Interior Door Handle by Dorman®. With this product, there is no need to replace the entire door opening mechanism and pay extra money. Constructed to fit the exact design of your vehicle, this door handle features OEM quality…
Which is the best door seal for a Jeep Grand Cherokee?
Door Skin Patches by Sherman®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Sherman will last a lifetime. It will… Door Seals by Omix-ADA®.
Remove the final retainer bolt positioned on top of the brake pedal in a similar fashion.Slide the dash towards you and disconnect the electrical connectors going into the back side of the dash. Drag the dash up and carry it out of your Jeep. “Jeep Grand Cherokee 1993 thru 2004: All Models; Haynes Repair Manual”; John Haynes; 2004
What makes up the dashboard of a jeep?
The dashboard is composed of many pieces including the gauges of the instrument cluster and the surrounding panel, the defroster vent cover and radio panel, along with the panel that surrounds the heater controls. Park your Jeep and apply the parking brake.
Where can I find parts for my Jeep Grand Cherokee?
Locate any kind of jeep grand cherokee parts you are searching for through our part requester. Our truck part dealers nationwide have lots of grand cherokee parts for your jeep grand cherokee from grand cherokee transmissions and engines to jeep grand cherokee headlights and bumpers and everything in between.
How do you remove kick panels from Jeep?
Remove the retainer screws for the kick panels and pull the kick panels straight out. Pry off the trim pieces going around the glove box using the flathead screwdriver to reveal the retainer bolts. Remove these bolts with the socket wrench. Locate the retainer bolts on the ends of the dash panel and remove them with the socket wrench.
Why is there no air in my Jeep Grand Cherokee?
Found broken vacuum hose under battery platform going into reservoir, replaced that (my cruise control started working). Cleared check valve in vacuum line near firewall, got a bit of air blowing but still not enough. Finally after reading your idea here, pulled the blower motor to check direction of flow.
What kind of blower motor does a 2004 Grand Cherokee have?
2004 grand Cherokee limited v8 4.7 here. blower motor (sensor) replaced last month (Not OEM part) due to A whisper of hot and cold air only. The cold and hot air is coming out now but not nearly enough like before to cool entire interior. Have to keep fan on high just to feel slightly comfortable in driver seat.
Is there a cabin filter in a Jeep Grand Cherokee?
No there isn’t they didn’t make cabin filter in jeeps from 1997 to 2009 or something like that so thats why i was spraying the AC evaporator coil because there was a lot of dirt and debris. One of the dumb moves or smart i guess on Chrysler so it breaks down quick and are forced to pay 2000 to get the AC and heater coils replaced.
Where is the blend door motor on a Grand Cherokee?
Physically check the operation of the blend doors by removing the glove box. Remove the blend door motor which is located to the side of the opening. The motor is held in place with two Phillips screws. Disconnect the wire harness and remove the motor. blend door.
What to do if your Jeep Grand Cherokee has no air?
Check if Air flows from the defrost vents below the windshield. If it does, and no matter what U do, then the vacuum hose on engine side is not fitted on the Vacuum pipe there. Just fit it back to fix the problem !