What type of transmission fluid does a 2000 Jeep Wrangler take?
Valvoline Synthetic Transmission Fluid ATF+4 1 Quart.
What kind of transmission fluid does a 2003 Jeep Grand Cherokee take?
The recommended transmission fluid for the 2003 Jeep Grand Cherokee is Mopart atf +4 and has a capacity of 10 quarts for a total fill as stated by the manufacturer. The automatic transmission fluid and filter should be serviced and flushed every 60,000 miles to keep the transmission operating efficiently.
What type of transmission fluid does a Jeep TJ take?
Jeep Wrangler TJ Fluid Capacities
| Component | Quantity | Fluid Type |
|---|---|---|
| 30RH 3-Speed Automatic | 4 Quarts for Pan Drop / 8.6 Quarts for Dry Fill | ATF 4 |
| 32RH 3-Speed Automatic | 4 Quarts for Pan Drop / 8 Quarts for Dry Fill | |
| 42RLE 4-Speed Automatic | 4 Quarts for Pan Drop / 8.8 Quarts for Dry Fill | |
| Dana 30 Axle | 1.3 Quarts / 1.2 Liters | 80w-90* |
What kind of transmission fluid does a 2001 Jeep Cherokee use?
Valvoline Transmission Fluid Dexron/Mercon 1 Gallon.
What type of transmission fluid goes in a 2002 Jeep Grand Cherokee?
For 2002 Grand Cherokee Second generation Jeep recommends to use: ATF+4, and ATF+3 automatic transmission fluids. To select the right automatic transmission fluid see the table below.
What kind of transmission fluid for Jeep Cherokee?
What Type of Transmission Fluid for Jeep Cherokee. Capacity Recommended oil for transmissions of Jeep Cherokee. Find out how much engine oil does your car need. Car A Rac presents recommended by manufacturers oil types. Recommended oil for transmissions of Jeep Cherokee.
What kind of oil does a Jeep Cherokee use?
Car A Rac presents recommended by manufacturers oil types. Recommended oil for transmissions of Jeep Cherokee. Find out how much engine oil does your car need. Car A Rac presents recommended by manufacturers oil types.
What kind of transmission fluid for Mazda BT-50?
Sizes of Wiper Blades Battery Fluids Engine Oil Transmission Fluid Antifreeze & Coolant Wheels Tire and Rim Sizes Bolt Patterns Filters Air Filter Cabin Filter Fuel Filter Oil Filter Brakes Brake Discs Brake Drums Brake Pads Brake Fluid Fans Bulbs Bulbs For Fog Lights Bulbs For Headlights Bulbs For Turn Signals Bulbs For Licence Plates
What kind of fluid does a Jeep Wrangler use?
Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type Clutch Fluid Fill to Full Mark DOT 3 Power Steering Reservoir Fill to Full Mark ATF 4 3.8L Cooling System 13 Quarts 50/50 Antifreeze/Water Mix 3.6L Cooling System (2013-2018) 10.5 Quarts 50/50 Antifreeze/Water Mix
How much oil does a Jeep Wrangler take?
Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type 3.8L Engine Oil 6 Quarts / 5.7 Liters 5w-20 3.6L Engine Oil 6 Quarts / 5.6 Liters 5w-20 Brake Fluid Fill to Full Mark DOT 3 Clutch Fluid Fill to Full Mark DOT 3
How many liters does a Jeep Wrangler have?
Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type Dana 30 Axle 2.1 Pints / 1.0 Liters 80w-90 Dana 35 Axle 3.5 Pints / 1.7 Liters 80w-90 Dana 44 Front Axle 2.7L / 1.3 Liters 80w-90 Dana 44 Rear Axle * 4.75 Pints / 2.25 Liters 80w-90
When to use ATF + 4 in Jeep Wrangler?
ATF+4 was developed to succeed ATF+3 applications and degrade much slower. Where a transmission with ATF+3 might experience some shudder at around the 30k mile mark, the same trans with ATF+4 shouldn’t experience shudder until 80-100k miles (depending on driving conditions). In short, ATF+4 is a complete replacement for ATF+3.