How to program keyless entry on a 1997 Jeep Grand Cherokee?

How to program keyless entry on a 1997 Jeep Grand Cherokee?

Double-check your Grand Cherokee’s owner’s manual for the proper procedure to program the remotes. The specific process is described in section 22 of the 1997 Jeep Grand Cherokee Owner’s Manual. Make sure to leave the driver door open during the procedure.

Can you change the remote on a Jeep Grand Cherokee?

You will find that your Grand Cherokee Jeep remote is now programmed. This process is a fast and effective way of reprogramming a remote keyless entry, and means that all is not lost when either the battery runs down and ahs to be replaced, or when you lose your remote and have to buy another one that is not intended for your own Jeep.

How do you program a Jeep Grand Cherokee?

Point the remote at the bulb. Press and hold the “LOCK” button on the remote until the doors unlock. The remote is now programmed. Check the remote for proper operation. Double-check your Grand Cherokee’s owner’s manual for the proper procedure to program the remotes.

How do you unlock a Jeep Grand Cherokee?

When you have done this, insert your key into the ignition and turn it on. Wait until your Jeep chimes are silent, then press and hold the ‘Unlock’ button on the remote. Hold this button down for four seconds and then press the ‘Panic’ button simultaneously. Hold both these buttons down for one second and then release them both.

Where can I buy a jeep remote key?

Save up to 60% on dealership prices when you order a JEEP keyless entry remote or transponder key from our online store. When you buy your next Jeep key fob for your Liberty, Commander or Grand Cherokee, simply stop by your local dealer for programming. Replacement car key fobs are quite expensive at a locally.

Do you need a remote to program a Jeep Grand Cherokee?

Grand Cherokee Keyless Remote Programming Instructions Learn to program the remote in your Jeep Grand Cherokee. In order to do so, you must have one working remote. If you don’t, you’ll have to have a Chrysler or Dodge dealer program the remote for you. The Jeep Grand Cherokee came out in 1993 as a more luxurious alternative to the Jeep Cherokee.

Why is my Jeep fob remote not working?

Guess it’s the WCM (whatever that is) within the Jeep. Wireless control module… Typically if a dealer needs to reset something there is another underlying cause… Not that I would have ANY idea what that is over the interwebz. Personally I have never had to reset a wcm to repair a key problem.

Are there any keyless entry fobs for cars?

Keyless entry fobs are one example of those technological wonders that make life a little bit easier. The situations in they come in handy are practically too numerous to name all of them!

What to do when your Jeep Grand Cherokee won’t start?

As mentioned, the next time the engine won’t start leave the ignition switch on so the dash lights are on. Step on the brake pedal and shift the transmission into neutral and then try starting the engine. If the engine starts then the problem is with the transmission range switch. Thanks for all the suggestions!

When to reset the Immobilizer on a Jeep Grand Cherokee?

The system is activated when something other than an authorized key is used to try to start the engine. Most models are also equipped with an alarm system as part of the security system. If something triggers the immobilizer or the alarm system, you need to reset and rearm the system.

Where is the remote on a Jeep Grand Cherokee?

Locate the remote receiver bulb in the ceiling of the vehicle. This is usually located toward the front of the ceiling. Point the remote at the bulb. Press and hold the “LOCK” button on the remote until the doors unlock. The remote is now programmed.

As mentioned, the next time the engine won’t start leave the ignition switch on so the dash lights are on. Step on the brake pedal and shift the transmission into neutral and then try starting the engine. If the engine starts then the problem is with the transmission range switch. Thanks for all the suggestions!

How do I Reset my Jeep Grand Cherokee?

Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed. “2011 Jeep Grand Cherokee Owner’s Manual”; Chrysler Group LLC; 2010

What to do if you have a damaged key on a jeep?

When I try to start it whit the button it says damaged key y try changing the battery’s and it didn’t work, control works fine. Can anyone help.

How do you turn off the alarm on a jeep?

Press the power door-lock switch on the keyless entry fob. Close the driver’s side door. Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed.