What type of oil does a 2014 Jeep Cherokee take?

What type of oil does a 2014 Jeep Cherokee take?

We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA US Material Standard MS-6395 such as MOPAR®, Pennzoil®, and Shell Helix®. Refer to your engine oil filler cap for correct SAE grade. We recommend you use a MOPAR® Engine Oil Filter.

How do you change the oil on a Jeep Cherokee?

Jeep Cherokee Oil Change Procedure:

  1. Park vehicle in a level spot.
  2. Warm engine to operating temp.
  3. Raise front end by driving it on to ramps or using the jack to set it on jack stands.
  4. Remove the engine oil fill cap and check the oil level on dipstick to check for any prior issues.

Does a 2014 Jeep Cherokee take synthetic oil?

The 2014 Jeep Cherokee uses SAE 5W-20 motor oil in the engine. Jeep recommends that You use synthetic oil whenever You need to replace it. There are two main types of oil that You can find on the market. The first is synthetic and the second is conventional.

Does a 2015 Jeep Cherokee need synthetic oil?

Models equipped with the 4Cylinder will need to use synthetic 0W-20 oil and they will have a capacity of 5.5 US quarts. If You have the larger V6 then You will need to use synthetic 5W-20 and You will have an oil capacity of 5.9 US quarts.

How do you change the oil in a Jeep Cherokee?

For most Jeeps, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, see our parts page to find a Jeep Cherokee oil filter wrench. If your Cherokee is too low to the ground to access your drain plug and oil filter, be sure to use jack stands…

What should oil pressure be on Jeep WK2?

The check engine light came on but all the systems seemed normal. Temps were fine but the oil pressure was at 100psi. High even if it’s a cold engine. 18K miles. They replaced the Engine Oil Pressure Sensor and things are back to normal. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination.

How to check the transmission fluid in a Jeep Cherokee?

Transmission Fluid Level Check Jeep Cherokee (2014-2019) Our research indicates that your vehicle does not have a transmission fluid dipstick. These types of transmissions are designed to be maintenance free. In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car.

When to replace the oil pressure sensor on a jeep?

High even if it’s a cold engine. 18K miles. They replaced the Engine Oil Pressure Sensor and things are back to normal. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination.

Can you change the oil in a 2014 Jeep Cherokee?

This video shows you how to change the oil and oil filter in your 2014 Jeep Cherokee. When you change your own oil, you know that you are putting quality oil in your Cherokee and that the filter is being changed too. Most importantly, you get a chance to look around under your Cherokee for potential trouble spots.

How to change the oil in a Jeep Liberty?

Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug 5. Find Oil Filter – Locate the oil filter 6. Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap 9.

How much does it cost to replace oil filter in Jeep?

It seems Chrysler opted to change from a metal part to a plastic part back in 2014 and seal or plugs on the part will leak pooling oil which then runs down the engine and transmission. The part ranges from where you get it with the dealership around $300 which were back-ordered due to the number of part failures.

Why is my oil filter leaking on my Jeep Wrangler?

After seeing this is a reoccurring issue with Jeep wranglers 2014 on and with other vehicles using the same engine – this is a serious design defect. It seems Chrysler opted to change from a metal part to a plastic part back in 2014 and seal or plugs on the part will leak pooling oil which then runs down the engine and transmission.