How big are the speakers on a Jeep Cherokee?
It’s still well within the capabilities of the average DIY-er, though, so have no fear. The Cherokee’s front doors can house a variety of aftermarket speakers (Crutchfield Research Photo) The Cherokee’s standard factory front door speakers are Chrysler’s somewhat ubiquitous 4-ohm 5-1/4″ models.
What kind of stereo system does a Jeep Cherokee have?
In brief: This Crutchfield Research Garage article gives you an overview of your Cherokee’s stock stereo system and your aftermarket upgrade options. Use our vehicle selector to find the gear that will fit your Jeep. When it comes to compact SUV’s, the “XJ” Jeep Cherokee was, and remains, one of the best of its era.
What are the specs for a Jeep Cherokee?
Control arms lengths are important for castor and location of axle in the wheel wells. At 3″, you will be ok with stock arms, just expect the axle to move back toward the cab a little and some minor bumpsteer. XJ Cherokee Specs!
How big is the dash of a Jeep Cherokee?
While your Cherokee’s dash cavity isn’t big enough for a double-DIN (4″ tall) receiver, it will comfortably swallow a vast array of single-DIN (2″ tall) receivers.
It’s still well within the capabilities of the average DIY-er, though, so have no fear. The Cherokee’s front doors can house a variety of aftermarket speakers (Crutchfield Research Photo) The Cherokee’s standard factory front door speakers are Chrysler’s somewhat ubiquitous 4-ohm 5-1/4″ models.
What kind of stereo system does a Jeep Grand Cherokee have?
The Grand Cherokee was available with two different stereo packages. The base system was an AM/FM/cassette player and six speakers (front and rear doors, and dash tweeters).
How do you change the stereo in a jeep?
Put the key into the driver’s door and turn it to lock, then unlock the door. This will disarm the system and make the lights stop flashing. It’s relatively easy to retain your Jeep’s steering wheel audio controls when you install a new stereo.
Control arms lengths are important for castor and location of axle in the wheel wells. At 3″, you will be ok with stock arms, just expect the axle to move back toward the cab a little and some minor bumpsteer. XJ Cherokee Specs!
What kind of sound bar does a Jeep Cherokee have?
There was also an option for an overhead sound bar with two 5-1/4″ speakers. In 2002, Jeep introduced a 7-speaker system, consisting of a 4″ woofer and 1″ tweeter on each side of the underdash, the two 5-1/4″ speakers in the sound bar, and a 6-3/4″ powered sub in the center console.
What kind of stereo system does a Jeep Wrangler have?
This system consisted of separate woofers and tweeters in the front, rear speakers in the sound bar, and a 6-3/4″ subwoofer in the center console. A factory stereos go, this was certainly an improvement, but it’s still a factory stereo.
What should I upgrade the stereo system on my Jeep Cherokee?
If you’re the kind of Cherokee owner who’s really serious about off-roading, we’d suggest upgrading your stereo system with weather-resistant marine-rated receivers, speakers, and subs. The installation info is the same, but you’ll be installing gear that’s built to handle moisture and extreme temperatures.
In brief: This Crutchfield Research Garage article gives you an overview of your Cherokee’s stock stereo system and your aftermarket upgrade options. Use our vehicle selector to find the gear that will fit your Jeep. When it comes to compact SUV’s, the “XJ” Jeep Cherokee was, and remains, one of the best of its era.
How can I tell what speakers fit my car?
To see which speakers fit your vehicle, we’ve disassembled the door panels of tens of thousands of vehicles, measured the spaces where the factory speakers fit, and loaded our findings into Crutchfield’s massive fit database.
How do you hook up a stereo to a jeep?
Hold the receiver assembly near the dash and connect the Crutchfield adapter harness to the factory harness, then plug the antenna lead into the rear of the receiver and slide the entire assembly into the dash cavity. Secure it with the two 3/8” screws you removed earlier, then test the receiver to make sure everything’s working properly.
To see which speakers fit your vehicle, we’ve disassembled the door panels of tens of thousands of vehicles, measured the spaces where the factory speakers fit, and loaded our findings into Crutchfield’s massive fit database.
How do you change the radio in a jeep?
Once you’ve removed the trim piece, remove the two 3/8” hex screws securing the factory radio to the dash, then disconnect the wiring harness and remove the radio.
Once you’ve removed the trim piece, remove the two 3/8” hex screws securing the factory radio to the dash, then disconnect the wiring harness and remove the radio.
What kind of car is a Jeep Cherokee?
While it’s still no match for a Lincoln Town Car when it comes to quiet and comfort, the 1997-2001 Cherokee is a practical, rugged truck that gets the job done on the road or off. If you’re looking for a reasonably priced, go-anywhere SUV that’s ripe for modification, this Cherokee is a terrific choice.