What does a fuse on a Jeep Cherokee do?
Fuse box diagram (fuse layout), location, and assignment of fuses and relays Jeep Cherokee XJ (1984, 1985, 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996). A fuse is an element for protecting the electrical system. A fuse will trip (i.e. it will blow) in the event of a failure or improper interventions in the electrical system.
What is the ignition switch on a Jeep Cherokee?
Ignition Switch – Back-up Lamps, A/C Relay Coil, Shift Selector, Speed Control, Aux. Cooling Fan Relay Coil WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.
What are the lights on a Jeep XJ?
Dome Light, Courtesy Lights, Glove Box Light, Cargo Light, Radio Memory, Power Mirrors, Teltak Connector Engine Control (ECU) – Fuel Pump, Injectors, Ignition Coil, Oxygen Sensors, Generator Field, Engine Controller Automatic Transmission Controller (ATCU)
Fuse box diagram (fuse layout), location, and assignment of fuses and relays Jeep Cherokee XJ (1984, 1985, 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996). A fuse is an element for protecting the electrical system. A fuse will trip (i.e. it will blow) in the event of a failure or improper interventions in the electrical system.
Where is the relay panel on a Jeep Cherokee?
The relay panel is to the right of the steering column, under the instrument panel. Fig. 2: Relay Block Identification (1993-95 Models) Courtesy of Chrysler Corp. No additional definition. No additional definition.
Ignition Switch – Back-up Lamps, A/C Relay Coil, Shift Selector, Speed Control, Aux. Cooling Fan Relay Coil WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.
Dome Light, Courtesy Lights, Glove Box Light, Cargo Light, Radio Memory, Power Mirrors, Teltak Connector Engine Control (ECU) – Fuel Pump, Injectors, Ignition Coil, Oxygen Sensors, Generator Field, Engine Controller Automatic Transmission Controller (ATCU)
How many amps does a Jeep Cherokee have?
Jeep Cherokee (XJ) 1997 – 2001 Fuse & Relay Information 21 15 Amp Horn (s) 22 20 Amp Rear wiper switch & motor 23 10 Amp Right side marker, turn, parking and tai 24 – – – Spare Fuse
What should you know before changing a fuse?
Before changing a fuse, check the ignition key has been removed and that all the other electric devices have been turned off/disabled. Never replace a broken fuse with anything other than a new fuse. Always use a fuse of the same colour. Never change a fuse with another amperage. This can cause damage to the electrical system and fire.
Before changing a fuse, check the ignition key has been removed and that all the other electric devices have been turned off/disabled. Never replace a broken fuse with anything other than a new fuse. Always use a fuse of the same colour. Never change a fuse with another amperage. This can cause damage to the electrical system and fire.
Where are the fuses in a Jeep Cherokee?
Here you will find fuse box diagrams of Jeep Cherokee 1997, 1998, 1999, 2000 and 2001, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay. Cigar lighter (power outlet) fuses in the Jeep Cherokee are the fuses #1 and #2 in the Instrument panel fuse box.
What are the switches on a Jeep Cherokee?
Instrument Cluster, Radio, Rear Wiper/Washer Switch, A/C Heater Control or Heater Control, Rear Window Defogger Switch, Extended Idle Switch, Front Fog Lamp Switch, Rear Fog Lamp Switch, Transmission Range Indicator Illumination (PRNDL), Transfer Case Switch Illumination
Instrument Cluster, Radio, Rear Wiper/Washer Switch, A/C Heater Control or Heater Control, Rear Window Defogger Switch, Extended Idle Switch, Front Fog Lamp Switch, Rear Fog Lamp Switch, Transmission Range Indicator Illumination (PRNDL), Transfer Case Switch Illumination
Where are the fuses located on a Honda Accord?
Located to the left of #16. Junction / Fuse Block (Located inside kick panel.) (What the fuse is for.) Power outlet – Located top left column in fuse bank. Power mirrors, rear defogger & switch – Located bottom left column in fuse bank. Passenger power lock/window switch – Located top right column in fuse bank.
How do you know if a fuse is blown?
If an electrical device is not working, check whether the respective fuse is blown. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Check those fuses first that protect the failed component, but check all the fuses before deciding that a blown fuse is not the cause.
What’s the problem with my 1998 Jeep Cherokee?
1998 jeep Cherokee classic has door locking/unlocking problem. sometimes they work and sometimes they don’t. passenger door lock makes a ticking noise when I push the door lock on drivers door. nothing will lock or unlock electronically. any help on how to fix would be very helpful. oldman44oldjeep98, May 1, 2018.
What kind of door lock does a Jeep Cherokee have?
Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37″ Toyo MTs. I will assume you have a 4 door Cherokee.
How to diagnose power door locks dont work properly?
If all of the door locks are inoperative, start your diagnosis at the fuse box. Inspect the fuse that protects the door lock circuit to ensure it is not blown. Consult the fuse box placard or your owners manual for fuse designations and ratings.
Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37″ Toyo MTs. I will assume you have a 4 door Cherokee.
1998 jeep Cherokee classic has door locking/unlocking problem. sometimes they work and sometimes they don’t. passenger door lock makes a ticking noise when I push the door lock on drivers door. nothing will lock or unlock electronically. any help on how to fix would be very helpful. oldman44oldjeep98, May 1, 2018.
Why is my passenger door lock not working?
If the passenger door button doesn’t work you will have to dig deeper and figure out where the problem is like 2oldjeeps says. The switch is the most common problem though. The door lock circuit is actually in the passenger door. I have an issue with my 00 XJ where they will work only occasionally and I can hear one of the relays clicking.
If an electrical device is not working, check whether the respective fuse is blown. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Check those fuses first that protect the failed component, but check all the fuses before deciding that a blown fuse is not the cause.
How to remove the Check Engine Light Fuse?
To remove check engine light fuse, you can use a code spanner or you can simply unplug the battery. On-Board Diagnostics (OBD) scanners are most appropriate for automobiles manufactured after 1996. For automobiles produced after the 1990s, they may not have an OBD port beneath the control panel.
What to do if you blow fuse on Jeep Commander?
Replace any blown fuses with another with the same amperage (same color) and check the component’s operation. Before changing a fuse, check the ignition key has been removed and that all the other electric devices have been turned off/disabled.
What does a fuse do on a Jeep Grand Cherokee?
Fuse box diagram (fuse layout), location, and assignment of fuses and relays Jeep Grand Cherokee (WK2) (2010, 2011, 2012, 2013). A fuse is an element for protecting the electrical system. A fuse will trip (i.e. it will blow) in the event of a failure or improper interventions in the electrical system.
To remove check engine light fuse, you can use a code spanner or you can simply unplug the battery. On-Board Diagnostics (OBD) scanners are most appropriate for automobiles manufactured after 1996. For automobiles produced after the 1990s, they may not have an OBD port beneath the control panel.
Replace any blown fuses with another with the same amperage (same color) and check the component’s operation. Before changing a fuse, check the ignition key has been removed and that all the other electric devices have been turned off/disabled.
What happens when a fuse is not working?
A fuse will trip (i.e. it will blow) in the event of a failure or improper interventions in the electrical system. If an electrical device is not working, check whether the respective fuse is blown.
A fuse will trip (i.e. it will blow) in the event of a failure or improper interventions in the electrical system. If an electrical device is not working, check whether the respective fuse is blown.
Where are the fuses in the Jeep Cherokee?
The video above shows how to replace blown fuses in the interior fuse box of your 1995 Jeep Cherokee in addition to the fuse panel diagram location. Electrical components such as your map light, radio, heated seats, high beams, power windows all have fuses and if they suddenly stop working, chances are you have a fuse that has blown out.
Fuse box diagram (fuse layout), location, and assignment of fuses and relays Jeep Grand Cherokee (ZJ / ZG) (1996, 1997, 1998). A fuse is an element for protecting the electrical system. A fuse will trip (i.e. it will blow) in the event of a failure or improper interventions in the electrical system.
Where do I find the fuse box diagram?
However, sometimes the wire may look intact even in the blown fuse. Fuse box diagrams presented on our website will help you to identify the right type for a particular electrical device installed in your vehicle. Use our website search to find the fuse and relay schemes (layouts) designed for your vehicle and see the fuse block’s location.
When do you need to replace a fuse box?
Inspect a metal strip (fusible element). A damaged one means the fuse has blown. If so, you need to replace it. However, sometimes the wire may look intact even in the blown fuse. Fuse box diagrams presented on our website will help you to identify the right type for a particular electrical device installed in your vehicle.
Is there a fuse for the rear lights?
Yes fuse 1 its a 20amp fuse. I disconnected the plug for the rear lights under the dash and the front lights at the plug near the firewall under the brake master cylinder. Yes fuse 1 its a 20amp fuse.
Why does my 1998 Jeep Grand Cherokee drain by itself?
A 1998 Jeep Grand Cherokee has gone through 3 batteries in the last 3 months. While they have all been replaced by warranties, it’d be nice to get the problem solved permanently. I’ve tested the alternator, and it’s not defective. I’m suspecting it might be a short somewhere in the system.
Where are the fuses on a Jeep Cherokee?
Jeep Cherokee (XJ) 1997 – 2001 Fuse & Relay Information FUSE NUMBER FUSE CURRENT RATING CIRCUIT INFORMATION (What the fuse is fo 1 25 Amp Power outlet – Located top left column i 2 25 Amp Cigar lighter 3 10 Amp Left headlamp
Can a Jeep Cherokee turn off on its own?
145 people found this helpful. It turns off on its own and it wont turn on right away and sometimes it wont even turn on till a day later or so 113 people found this helpful.