What should I do if my Jeep Cherokee cooling fan does not work?
Check for battery voltage at terminal 2 of fan relay connector (Fig. 43). Connect a jumper wire across the radiator temperature switch harness connector. If fan operates proceed to next step. If fan does not operate replace radiator temperature switch once the engine has cooled down.
How does the cooling system work on a Jeep Cherokee?
When coolant temperature is below 190*F (88*C) the switch is open preventing the relay from being grounded and the cooling fan from being energized. When the air-conditioning is used the engine ECU grounds the A/C relay coil allowing current to flow through it.
Where is the coolant temperature sensor located on an engine?
The readings produced from the coolant temperature sensor are transmitted to the engine control unit, where they are utilized as data for regulating and maintaining the proper ignition time and the optimal fuel injection through the computerized approach. The engine coolant temperature sensor is usually located on the engine block or cylinder head.
How to check battery voltage in Jeep Cherokee?
Check for battery voltage at terminal 2 of the fan relay connector (Fig. 43). If battery voltage is not present replace the fan diode assembly. With engine running, A/C on, and fan relay removed, check for battery voltage at terminal 2 of fan relay connector (Fig. 43).
How to test your Cherokee coolant sensor and wiring?
To properly test the coolant sensor, you’ll need a multimeter that can test for resistance, most do. Attach one lead of your tester to the black wire, and the other lead to ground. Remove the coolant sensor from the reservoir tank. With the float all the way down, the resistance across the contacts should be zero.
How does the cooling fan work on a Jeep Cherokee?
Jeep Cherokee Electric Cooling Fan Diagnosis & Repair. When the air-conditioning is used the engine ECU grounds the A/C relay coil allowing current to flow through it. This activates the A/C relay which then supplies current to the A/C clutch, fan diode assembly and cooling fan relay.
Check for battery voltage at terminal 2 of the fan relay connector (Fig. 43). If battery voltage is not present replace the fan diode assembly. With engine running, A/C on, and fan relay removed, check for battery voltage at terminal 2 of fan relay connector (Fig. 43).
What should temp be when cooling fan does not come on?
NOTE: if the cooling fan doesn’t come on when the engine has been operating for 20 minutes or more, make sure that coolant is reaching operating temperature, around 220°F (104°C). You may be dealing with a stuck-open thermostat.
Where is the low temp fan switch on a 1996 Corvette?
1985-1996 Corvette Low Temp Cooling Fan Control Switch would be installed in this location (driver’s side cylinder head between cylinders 1 and 3). Cut the dark green /white wire at the inner fender well.
Why is the air conditioning not working on my Jeep Grand Cherokee?
What are common reasons my Jeep Grand Cherokee has air conditioning problems? While there are a variety of reasons your Jeep Grand Cherokee air conditioning won’t work, the most common 3 are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor.
Why does my Jeep Grand Cherokee make a clicking sound?
The most common symptom of faulty blend door actuator on Jeep Grand Cherokee is a slight clicking sound repeatedly coming from under the dashboard. The sound will be most prominent for a few seconds when you turn on the air conditioning or adjust the temperature. Sometimes changing the temperature can temporarily stop the sound.
Why does my Jeep Grand Cherokee Fan quit working?
In this one we take a stab at permanently fixing a common issue with the 1999-2004 Jeep Grand Cherokee. The electric cooling fan will quit working, and your jeep will overheat, due to a failure in the electronic fan control relay. This is a heat related failure and I add a large heat sink and relocate the relay to try and avoid further issues.
What are common reasons my Jeep Grand Cherokee has air conditioning problems? While there are a variety of reasons your Jeep Grand Cherokee air conditioning won’t work, the most common 3 are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor.
When does the radiator fan turn on in a jeep?
The radiator fan only turns on once the temperature reaches a certain temperature I believe its about half. But on highway speeds it should run very cool. Your electric fan WILL turn on with your A/C switched on, I was 100% certain it did BEFORE I went out to test it simply so I could say I tested it.
What to do if your radiator fan is not working?
No the AC will turn the radiator fan on to pull air across the condensor. Your going to need to check for power at the fan, the fan can still be failed and spin just fine by hand, considering you dont have high or low I would lean towards a fan or fan connector concern.
What to do if cooling fan does not work?
If fan motor does NOT operate, check continuity between terminal 4 of the relay connector (Fig. 43) and body ground connections on the fender panel back from the relay connector (Fig. 42). If continuity exists replace the fan motor.
Why is my Jeep radiator not turning on?
The fan will turn on after the temperature reaches about half. Usually comes on when the car is standing still due to the small amount of air circulating through the radiator. Too many mods to list… No the AC will turn the radiator fan on to pull air across the condensor.
How does the cooling fan work on a Jeep Grand Cherokee?
The cooling fan in a Jeep Grand Cherokee keeps engine temperatures at the correct level by kicking on during times when the engine reaches higher-than-average temperatures. Without it, the engine can reach dangerous temperatures and damage engine components.
What to do if your Jeep Grand Cherokee radiator is not working?
The first thing that you would want to do is locate the fuse for your Grand Cherokee’s radiator fan and make sure that it hasn’t blown. If it is blown, replacing the fuse will only solve the problem for a very limited period of time. Unless the wiring issue is fixed, the fuse will blow again. The wiring harness itself can go bad.
Why is my radiator fan not turning on?
The fan will turn on after the temperature reaches about half. Usually comes on when the car is standing still due to the small amount of air circulating through the radiator. No the AC will turn the radiator fan on to pull air across the condensor.
How can I tell if my Chevy Aveo radiator fan is bad?
You can test the voltage going from the fan relay to the fan itself. If it is getting 12+ volts, the fan should be coming on. But if it’s not, which means the fan has gone bad. This video from Ratchets and Wrenches is a phenomenal resource on how to properly diagnose a wiring problem.
Why does my Jeep Cherokee keep stalling?
While certainly frustrating, these stalls can also have serious consequences. Here is why your Jeep Cherokee keeps stalling: Many stalling problems can be attributed to the PCM or crankshaft sensor and there are steps you can take to fix these issues yourself or at the very least point your mechanic in the right direction
How many miles does a Jeep Cherokee take to stall?
Jeep Cherokee XJ’s and Cherokee KJ’s with less than 25,000 miles have experienced stalling problems, but most cases seem to involve vehicles with 75,000 miles or more on them, and it is with particular reference to these older vehicles that the PCM is most relevant.
How does the fan clutch work on a Jeep Wrangler?
The fan drive viscous clutch (or fan clutch for short) is a silicon fluid filled coupling with a bimetallic coil that is attached to your Jeep’s fan. When working properly, the fan clutch will react to the heat discharging from you radiator by spinning faster or slower depending on the cooling needs of your engine.
What kind of clutch does a Jeep Wrangler have?
The fan drive viscous clutch (or fan clutch for short) is a silicon fluid filled coupling with a bimetallic coil that is attached to your Jeep’s fan.
While certainly frustrating, these stalls can also have serious consequences. Here is why your Jeep Cherokee keeps stalling: Many stalling problems can be attributed to the PCM or crankshaft sensor and there are steps you can take to fix these issues yourself or at the very least point your mechanic in the right direction
Jeep Cherokee XJ’s and Cherokee KJ’s with less than 25,000 miles have experienced stalling problems, but most cases seem to involve vehicles with 75,000 miles or more on them, and it is with particular reference to these older vehicles that the PCM is most relevant.
Where is the temperature sensor on a Jeep Grand Cherokee?
To test the solenoid unplug the temperature sensor located between the A/C compressor and the alternator just in front of the intake manifold. If the solenoid is working properly the fan will go into Hi-speed. If there is no change in RPM of fan the solenoid or the wiring from ECM to solenoid is at fault.
Check for battery voltage at terminal 2 of fan relay connector (Fig. 43). Connect a jumper wire across the radiator temperature switch harness connector. If fan operates proceed to next step. If fan does not operate replace radiator temperature switch once the engine has cooled down.
When coolant temperature is below 190*F (88*C) the switch is open preventing the relay from being grounded and the cooling fan from being energized. When the air-conditioning is used the engine ECU grounds the A/C relay coil allowing current to flow through it.
What kind of fan shroud for Jeep Cherokee XJ?
Mishimoto MMFS-CHE-68 Silver Aluminum Performance Fan Shroud.mishimoto Rendimiento Ventilador Sud… Mishimoto MMFS-E46-99NPT Black Performance Fan Shroud Kit.mishimoto mmfs-e46–99NPT Negro Rendimie… Pages with related products.
The first thing that you would want to do is locate the fuse for your Grand Cherokee’s radiator fan and make sure that it hasn’t blown. If it is blown, replacing the fuse will only solve the problem for a very limited period of time. Unless the wiring issue is fixed, the fuse will blow again. The wiring harness itself can go bad.
What should I do if my radiator fan is not working?
A blown fuse is no big deal, and changing one does not cost a lot of money. If your car’s radiator fan is non-functional, check your car’s user manual and locate the fuse for the radiator fan controller or the fan. The fan itself often uses a big fuse of around 50A, while there might also be a separate small fuse to the fan control module.
Why is the radiator fan not working on my Jeep Grand Cherokee?
If your Grand Cherokee has a bad engine temp sensor the radiator fan won’t know to come on, because the ECU won’t know how hot the engine is. You’ll need to locate and test the engine temp sensor. Depending on the model year and engine, the location varies. If it does end up being this sensor, they are very affordable.
Where does the radiator fan go when its hot?
Having said that Matt, as I already suggested, when its hot out I run right at the middle hash mark, when its cool I run just mm or 2 below, with a known fully functional fan. It has done this for the 1.5 years I have had it, first noticed while I was towing and it freaked me out for a second but it has NEVER gone above the 1/2 hash mark.
How to troubleshoot a jeep PWM fan relay test?
Radiator Fan Motor Circuit Wiring Diagram (1999-2003 4.0L Jeep Grand Cherokee). TIP 1: The way I’ve designed the Jeep PWM fan relay test, you’ll need a scan tool that can read live data (not a code reader), since you’ll need to keep an eye on the engine’s coolant temperature with it.
Radiator Fan Motor Circuit Wiring Diagram (1999-2003 4.0L Jeep Grand Cherokee). TIP 1: The way I’ve designed the Jeep PWM fan relay test, you’ll need a scan tool that can read live data (not a code reader), since you’ll need to keep an eye on the engine’s coolant temperature with it.