How do you check the throttle position sensor on a Jeep XJ?
Move the throttle and look for smooth meter response up to the 4.49 at WOT. The other wire will be the ground and should show no voltage. Perform the test procedure again and wiggle and/or tap on the TPS while you watch the meter. If you notice any flat spots or abrupt changes in the meter readings, replace the TPS.
How to test the TPS on a 1993 Jeep Grand Cherokee?
The throttle position sensor (TPS) on your 1993-1995 Jeep Grand Cherokee can be accurately tested with a simple multimeter to find out if it’s bad (or not). Also, you don’t have to remove it to test it and no scan tool is required for the test. In this tutorial I’ll show you just how. Contents of this tutorial:
What is the throttle position sensor on a Jeep Grand Cherokee?
You can find this tutorial in Spanish here: Cómo Probar El Sensor TPS (1993-1995 4.0L Grand Cherokee) (at: autotecnico-online.com ). The throttle position sensor (TPS) is one of the key components your Jeep’s powertrain control module (PCM) uses to calculate the correct amount of fuel to inject into the engine (among several things).
What does the throttle position sensor ( TPS ) do?
The throttle position sensor (TPS) is one of the key components your Jeep’s powertrain control module (PCM) uses to calculate the correct amount of fuel to inject into the engine (among several things). So, when the TPS fails, your Jeep is gonna’ resent it and lets you know right away something is amiss.
How is TPS used in a fuel injection system?
The TPS provides the most direct signal to the fuel injection system of what power demands are being made by the engine. The TPS signal is continually measured and combined many times per second with other data such as air temperature, engine RPM, air mass flow, and how quickly the throttle position changes.
The throttle position sensor (TPS) on your 1993-1995 Jeep Grand Cherokee can be accurately tested with a simple multimeter to find out if it’s bad (or not). Also, you don’t have to remove it to test it and no scan tool is required for the test. In this tutorial I’ll show you just how. Contents of this tutorial:
You can find this tutorial in Spanish here: Cómo Probar El Sensor TPS (1993-1995 4.0L Grand Cherokee) (at: autotecnico-online.com ). The throttle position sensor (TPS) is one of the key components your Jeep’s powertrain control module (PCM) uses to calculate the correct amount of fuel to inject into the engine (among several things).
How many miles does a 1994 Jeep Cherokee sport get?
1994 Jeep Cherokee Sport 4X4 4.0L 6cyl 21+ MPG 86,000 Original documented mileage. 1 Original owner Category Autos & Vehicles Show moreShow less Loading… AutoplayWhen autoplay is enabled, a suggested video will automatically play next. Up next 1994 Jeep Cherokee Sport 4×4 15,023 original miles FOR SALE PIPER – Duration: 1:20.
The throttle position sensor (TPS) is one of the key components your Jeep’s powertrain control module (PCM) uses to calculate the correct amount of fuel to inject into the engine (among several things). So, when the TPS fails, your Jeep is gonna’ resent it and lets you know right away something is amiss.