Will a Cherokee transfer case fit a Wrangler?
Would it fit? The 231 should fit just fine, the others will probably require some modification. Practically any Jeep transfer case will bolt up. Anything from the 90s or newer will have the common 6 bolt pattern that is used in Jeeps and Dodges.
How does the NP231 transfer case work on a jeep?
This is a result of good engineering and refinement. The early NP231 transfer case that was used in conjuction with vacuum controlled front axle hub disconnect on early XJ & YJ Jeeps did not have a true neutral disconnect between the front and rear axle when the 231 is shifted into neutral, as controlled by crown in the sector plate on the left.
What kind of transfer case does Jeep Wrangler have?
1987-1995 Jeep Wrangler (YJ) w/ NP231 Transfer Case. 1987-2001 Jeep Cherokee (XJ) w/ NP231 or NP242 Transfer Case. 1987-1992 Jeep Comanche (MJ) w/ NP231 Transfer Case.
Which is the best transfer case for Jeep 231?
The NP231 transfer case has turned out to surprise us in its strength, gearing, upgradeability and servicability. Most of our customers choose to retain their Jeep 231 with their conversions. It is very common for them to offer good service behind some of the strongest engines and transmissions.
What’s the stock rotation on a Jeep transfer case?
The New Process transfer cases used in late model Jeeps are always a left-hand drop configuration. The stock rotation on the New Process transfer case depends on the year of the vehicle and the stock transmission used. The rotations are approximately 13 or 23 degrees.
This is a result of good engineering and refinement. The early NP231 transfer case that was used in conjuction with vacuum controlled front axle hub disconnect on early XJ & YJ Jeeps did not have a true neutral disconnect between the front and rear axle when the 231 is shifted into neutral, as controlled by crown in the sector plate on the left.
What kind of transfer case does a Jeep Grand Cherokee use?
Since 1988, the NP231 has been the “Command Trac” transfer case used in the XJ Cherokee, MJ Comanche, and YJ Wrangler. It has been the “Command Trac” transfer case in the ZJ Grand Cherokee since its introduction.
The NP231 transfer case has turned out to surprise us in its strength, gearing, upgradeability and servicability. Most of our customers choose to retain their Jeep 231 with their conversions. It is very common for them to offer good service behind some of the strongest engines and transmissions.
How many splines are in a Jeep transfer case?
After doing some research I found that a ’99 XJ cherokee with a 4.0L and a manual transmission should have a np231 transfer case should have 23 splines so i’m wondering if it would bolt in without modifications, or if the spindle length/input shaft/output shaft is different in some way.