What to do if your Jeep Grand Cherokee door lock is not working?

99-04 Jeep Grand Cherokee Door locks-Door Switch-electric windows not working. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Why are my power door locks not working?

Please try again later. Power door locks are prone to failures due to electrical interruptions, corrosion, broken wires or blown fuses. Find out why a lack of any movement in door locks is most likely a result of a blown fuse with help from an auto mechanic in this free video on troubleshooting car problems.

Why is the lock switch on my Camaro not working?

Dead power door lock switch: The power door lock switch is a relatively simple rocker switch. It reacts to you pressing the lock or unlock button, and sends a simple signal to the actuator. Like light switches, the power door lock switch can die due to frequent use.

What to do if your car lock is not working?

The remote should also be checked for stuck buttons. If the problem is still active, then a scan of the body control module using a factory style scanner can isolate the cause of the problem. It may be the module or one of the door latches. A certified mobile mechanic from YourMechanic can provide this service at your home or office.

How much does it cost to fix a Jeep Grand Cherokee power door lock?

Jeep Grand Cherokee Power door locks are not working Inspection at your home or office. Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM. Our certified mobile mechanics can come to you now. Jeep Grand Cherokee Power door locks are not working Inspection costs $89 on average.

What’s the problem with my 1998 Jeep Cherokee?

1998 jeep Cherokee classic has door locking/unlocking problem. sometimes they work and sometimes they don’t. passenger door lock makes a ticking noise when I push the door lock on drivers door. nothing will lock or unlock electronically. any help on how to fix would be very helpful. oldman44oldjeep98, May 1, 2018.

What to do if your power door lock is not working?

If your power door locks start working normally after a fuse reset, you have two options: you can yank the fuse and do a reset when the door lock misbehave again, or you can take it to a shop and have the door lock software updated to correct the problem.

What happens when power door lock actuator fails?

Each door has its own actuator. They can fail completely, where they don’t lock or unlock the door but don’t make any noise, or they can fail partially. In a partial failure, you’ll hear some noise coming from the door panel and the manual door lock button may appear to move slightly, but not enough to completely lock or unlock the door.

Why is my passenger door lock not working?

If the passenger door button doesn’t work you will have to dig deeper and figure out where the problem is like 2oldjeeps says. The switch is the most common problem though. The door lock circuit is actually in the passenger door. I have an issue with my 00 XJ where they will work only occasionally and I can hear one of the relays clicking.

Where is the liftgate on a Jeep Wrangler?

The passenger side doors, the LH aft door and the liftgate are all controlled from the Passenger Door Module. I would start by looking into the fwd passenger door boot to see if there is any wire broken. This happened to my brothers ’00 WJ on the passenger side and I ended up replacing the lock actuator.

Is the power door lock on a Jeep Grand Cherokee working?

This feature is not available right now. Please try again later. 2004 Jeep grand cherokee power door locks and windows stopped working. found the problem and fixed it. Also the interior lights would not turn off and the jeep did not register as an open door. the FoB lock would not work either. Loading…

What can I do about the rear door latch on my Jeep Cherokee?

You can loosen the Torx screw and move the lever/button adjuster to allow for a full throw of the outside handle button when you press the button. This and some white lithium spray lube at pivot points of the latch mechanisms can have your “defective” rear door latches functioning as new!

How to troubleshoot a Jeep XJ Cherokee problem?

“If the power lock system is inoperative with either front door power lock switch, test the Passenger Door Module (PDM)…If the power lock system is inoperative with only the driver side front door power lock switch, test the Driver Door Module (DDM).” I can help you troubleshoot beyond these symptoms, too.

What are the features of a 1999 XJ Cherokee?

The XJ Cherokee in the article is our 1999 Cherokee Sport 4-door with power windows, power door locks, power mirrors and remote keyless entry (RKE). The passenger side front door module is the “brains”, containing both relays and switches. A quote from Chrysler helps:

Where is the right front switch on a Jeep Cherokee?

With the relays and switching that take place within the PDM (right passenger front switch module), it’s best to replace this right front door module/switch assembly— in any case .

How to open a Jeep Grand Cherokee rear passenger window?

Remove two screws – one a Phillips head in the read door inside pull (armrest) and the other a Torx #15 just under the inside door release lever, Then pry the interior door panel off; release the two door latch rods, unplug the electrical wire to the window motor by first unlatching it.

Why does my Jeep Grand Cherokee not work?

All gauges do not work ( work briefly if i press on the brake) I sent my Jeep to a mechanic I had problems my gauges did not work and he said it could be a coil spring or ignition. He serviced my vehicle and changed the ignition. That did not fix the problem but the items listed above do not work. He did

Why is my rear passenger window not working?

Three possibilities: 1) Bad window motor; 2) Broken wire going to the door; 3) Bad solenoid The solenoid for the rear window is in the front door, and if you can hear it making noise in the door when you press the window up button, that’s not the problem.

Why are my Jeep Grand Cherokee windows not working?

My 2004Jeep Grand Cherokee driver door locks and all windows stopped working. I found the black 10/12 gage wire and a yellow 18 gage wire broken in two within the driver side black boot covering the harness into the car body. I stripped and butt spliced both wires.

What was the problem with my Jeep Grand Cherokee?

2004 Jeep grand cherokee power door locks and windows stopped working. found the problem and fixed it. Also the interior lights would not turn off and the jeep did not register as an open door. the FoB lock would not work either. Loading…

What to do if your Jeep Grand Cherokee has electrical problems?

THE AUTO ELECTRICIAN JUST RESET THE POWER TO THE SWITCH FOR THE ELECTRIC WINDOWS. THIS HAS THEN RESET THE COMPUTER AND IT IS ALL WORKING NOW. CHECK ALL YOUR WIRES TO MAKE SURE YOU DONT HAVE A LOOSES CONNECTION. I have a 2006 Jeep Grand Cherokee that I bought from a dealer. It has about 45000 miles on it. Runs great.

Why is the key not detected on my Jeep?

The key was not detected. I opened the door and pushed the button and Jeep started. Closed the door and message said that key left the vehicle. Opened door again, put in drive, closed door and away I went. Makes no sense why the key would be detected with the door open and not closed???

Is there a problem with my Jeep FOB?

Put in new batteries an all’s well for 2-3 weeks and the issues return. Just took the fob apart, bent the four battery contacts as well as the side contact. Right now it’s working properly. The dealer couldn’t recreate the problem last month.

Why does my Remote not work on my Jeep Grand Cherokee?

Remote doesn’t work to unlock the doors. I’ve replaced the battery and tried my other fob and still nothing. THIS IS A SERIOUS SAFTEY ISSUE THAT NEEDS TO GET REPORTED. I was leaving the park when I got back into my car, hit the ignition button and may dashboard read “Key Fob Not Detected.”

Navigation