When did the Jaguar XJS convertible V12 come out?
For stopping power, the XJS Convertible V12 braking system includes Vented Discs at the front and Discs at the rear. The XJS Convertible model is a car manufactured by Jaguar, sold new from year 1988 until 1991, and available after that as a used car. Independent.
How to check fuses on a jagrepair Jaguar?
1. Check that you have a fully charged battery and that you have power to all fuse panels. 2. Be sure that you have fuel pressure. 3. Check that you have spark. This all seems easy until you get involved in doing it. I will suggest to you to check fuses, fuel schrader valve and all sorts of things.
How much power does a Jaguar XJS have?
This engine produces a maximum power of 277 PS (273 bhp – 204 kW) at 5250 rpm and a maximum torque of 404 Nm (297 lb.ft) at 2800 rpm. The power is transmitted to the road by the rear wheel drive (RWD) with a 3 speed Automatic gearbox.
Where do I find the fault code on my XJ-S?
XJ-S will automatically display code 5 seconds after ignition is switched on. Fault code number should be seen on VCM or trip computer display. Fault codes can only be cleared by use of dealer JDS, PDU or similar (also to display fault codes) or by grounding the lead provided for the purpose from the ECU (see below).
What are the fault codes for the AJ6 engine?
Fault codes and related functions are listed below. 15CU Fault Codes and Functions – 3.2 and 4 litre AJ6 Engine Idle pot. Looks for more than 4 volts on trim pot wire. Defaults to 2.5 volts. Air flow meter. Looks for air flow meter signal less than 0.2 or more than 4.5 volts between 400 and 300 r.p.m. Coolant thermistor.
What is the fault code on a Jaguar 3.6 Lucas 9cu?
JAGUAR 3.6 – LUCAS 9CU SYSTEM Code Display Procedure. When the facia display indicates “Fueling Failure” it is indicating that a fault has been detected. The fault identification number can be displayed as follows when the vehicle is stationary. Switch off engine. Wait 10 seconds. Switch on ignition – do not try to start engine.