Why is one side of my HID light not working?
Only one side is working on my HID kit or LED kit. If one side sometimes doesn’t turn on it could be caused by a bad bulb, HID ballast, LED driver or wiring. To help identify which component is defective follow these steps. Swap the ignitors to opposing sides (not applicable for LED kits). If the problem is reversed, you might have a bad ignitor.
How can I tell if my HID light bulb is bad?
The HID ballasts or LED drivers are the two metal boxes that came with your kit. To perform this test, please swap your HID ballast or LED driver to opposing sides and note what happens to your kit. Swap the HID or LED bulbs to opposing sides. If the problem is reversed, you might have a bad bulb. This step will check if you have a bad bulb.
Why are my bi-xenon HID low beams not working?
2. My HID Bi-Xenon high beams or low beams are not working or are inverted. This is a similar issue as above, the polarity of the connector’s pins are not correctly aligned. Bi-Xenon HID kits have 3 pins on the harness connector for ground, low beam and high beam connections. You will need to release the pins inside the connector and reorder them.
Where are the pins on the bi xenon HID kit?
Bi-Xenon HID kits have 3 pins on the harness connector for ground, low beam and high beam connections. You will need to release the pins inside the connector and reorder them. You may need several tries to find the proper orientation. Look inside the connector and with a precision screwdriver you can release the pins and reverse the wires. 3.
Only one side is working on my HID kit or LED kit. If one side sometimes doesn’t turn on it could be caused by a bad bulb, HID ballast, LED driver or wiring. To help identify which component is defective follow these steps. Swap the ignitors to opposing sides (not applicable for LED kits). If the problem is reversed, you might have a bad ignitor.
2. My HID Bi-Xenon high beams or low beams are not working or are inverted. This is a similar issue as above, the polarity of the connector’s pins are not correctly aligned. Bi-Xenon HID kits have 3 pins on the harness connector for ground, low beam and high beam connections. You will need to release the pins inside the connector and reorder them.
Bi-Xenon HID kits have 3 pins on the harness connector for ground, low beam and high beam connections. You will need to release the pins inside the connector and reorder them. You may need several tries to find the proper orientation. Look inside the connector and with a precision screwdriver you can release the pins and reverse the wires. 3.
The HID ballasts or LED drivers are the two metal boxes that came with your kit. To perform this test, please swap your HID ballast or LED driver to opposing sides and note what happens to your kit. Swap the HID or LED bulbs to opposing sides. If the problem is reversed, you might have a bad bulb. This step will check if you have a bad bulb.
What’s the difference between HID ballast and LED driver?
The HID ballasts or LED drivers are the two metal boxes that came with your kit. To perform this test, please swap your HID ballast or LED driver to opposing sides and note what happens to your kit. Swap the HID or LED bulbs to opposing sides.
Are there HID lights on a JAG xtype sport?
HI Thanks for your response, No I don’t have the HID lights just halogen bulbs and the light looks yellow, I have the manual levelling and have tried this, you can see the beam moving up and down so it is working but even when pointed up there is not much difference in visibility.
The HID ballasts or LED drivers are the two metal boxes that came with your kit. To perform this test, please swap your HID ballast or LED driver to opposing sides and note what happens to your kit. Swap the HID or LED bulbs to opposing sides.
Can a high wattage headlight cause light to flicker?
In a worst-case scenario the entire headlight wiring assembly may need replaced by a professional. Also, as with other troubleshooting issues, if you are using a bulb with too high of a wattage, this can make your headlights flicker as well.
What happens when one of the headlights is not working?
When one of the headlights is not working, the bulb of the faulty lamp may have burnt. The lifespan of bulbs is limited and this is greatly dependent on usage as well as magnitude of vibration they are exposed to. There is no way the tungsten filament in the incandescent bulb will not burn out.
Why does one side of my LED light not turn on?
If one side sometimes doesn’t turn on it could be caused by a bad bulb, HID ballast, LED driver or wiring. To help identify which component is defective follow these steps. Swap the ignitors to opposing sides (not applicable for LED kits). If the problem is reversed, you might have a bad ignitor.