How do you reset the inertia switch on a Jaguar?
The switch is reset by pressing down on the rubber cap on the top of the switch. If your doors lock, windows, seats and the wipers work and the dash lights up then all should be good, but if it makes you feel better reset the inertia switch. Check that you have a fully charged battery and that you have power to all fuse panels.
Where is the critical relay on a Jaguar XJ6?
A critical relay is in the RH under-bonnet fusebox. This one switches the supply to the starter relay and ignition coils (via fuse 12), also the oxygen sensor heaters (via fuse 14). Whilst you’re in that fuse box, check the condition of fuses 6, 11, 12, 14. These carry supply current to various parts of the engine-management system.
How do you get the ignition off a Jaguar XJ6?
Removal of the ignition barrel to free up the igntion switch is done by putting the key in and turning it to position ‘I’, and then pushing in the little detent pin on top of the outer barrel with a bent pointed tool. The lock barrel can then be pulled out, exposing the laterally moving part of the ignition switch.
How many fuel pumps does a Jaguar XJ8 have?
The XJ8 & XK8 has one fuel pump and the XJR & XKR have two fuel pumps, in either case they have fuses in the trunk. They also have relays related to each pump. If you think you have a bad relay you can swap that relay with a like relay. The theory is that the chances of having two bad relays at the same time is slim.
Where is the inertia switch located on a Jaguar?
The inertia switch is installed next to the fuse box in the LH end of the fascia. When activated, it de-energizes the ignition relays in the engine compartment, driver’s side fascia and trunk fuse boxes.
What happens when you turn off the ignition on a Jaguar?
When activated, it de-energizes the ignition relays in the engine compartment, driver’s side fascia and trunk fuse boxes. It also removes ground inputs from the BPM and windshield wiper stalk switch. This stops the engine and fuel pump, unlocks any locked door, and de-energizes unnecessary electrical systems.
What to do if your Jaguar does not start?
Take your transmission shifter and put it in the “N” position from “P” and try to start the car. The shifter selector switch has been known to wear out or out of adjustment causing a no start situation. If the car does not start put it back in “P” and check the inertia switch.
How to check fuses on a jagrepair Jaguar?
1. Check that you have a fully charged battery and that you have power to all fuse panels. 2. Be sure that you have fuel pressure. 3. Check that you have spark. This all seems easy until you get involved in doing it. I will suggest to you to check fuses, fuel schrader valve and all sorts of things.
When activated, it de-energizes the ignition relays in the engine compartment, driver’s side fascia and trunk fuse boxes. It also removes ground inputs from the BPM and windshield wiper stalk switch. This stops the engine and fuel pump, unlocks any locked door, and de-energizes unnecessary electrical systems.
Take your transmission shifter and put it in the “N” position from “P” and try to start the car. The shifter selector switch has been known to wear out or out of adjustment causing a no start situation. If the car does not start put it back in “P” and check the inertia switch.
1. Check that you have a fully charged battery and that you have power to all fuse panels. 2. Be sure that you have fuel pressure. 3. Check that you have spark. This all seems easy until you get involved in doing it. I will suggest to you to check fuses, fuel schrader valve and all sorts of things.
The switch is reset by pressing down on the rubber cap on the top of the switch. If your doors lock, windows, seats and the wipers work and the dash lights up then all should be good, but if it makes you feel better reset the inertia switch. Check that you have a fully charged battery and that you have power to all fuse panels.
Where is the reset button on the ignition switch?
Through this access hole you will be able to see the reset button on top of the inertia switch. On other vehicle models, the inertia switch is located on the passenger’s side floor pan, under the dashboard. Depress the reset button on top of the inertia switch. Turn the ignition switch to the “On” position for about 10 seconds and then turn it off.
What happens when you reset the fuel inertia switch?
Moreover, this switch cuts off fuel to your vehicle’s engine during a collision to prevent a more serious accident. Either way, you can restore fuel flow to your fuel system by resetting the inertia switch yourself.