Where is the SLM on a XK8 XKR?
To find it, open the boot and remove the battery cover. There is a fuse box assembly next to the battery. Remove the 3 x 10mm bolts holding the fusebox carrier. The SLM is underneath the fusebox carrier. Q: I have programmed the fobs successfully, but when I press the button to lock the car nothing happens!
How to turn on headlight flasher on XK8 XKR?
Enter the car and sit in the Drivers seat. 2. Place the key in the ignition. 3. Hold the headlight flasher arm back – the blue “high beam” light will come on the dashboard and the headlights will come on. 4. Keep holding the headlight flasher back and turn the ignition key to position 1.
How does remote fob on XK8 XKR work?
The lights work when I press the buttons but it does not communicate with my car. A: The remote fobs work on different transmittor frequencies in different parts of the world, for instance U.K and most of Europe use 433mhz, whereas U.S.A and Far East use 315mhz.
Where is the receiving aerial on a XK8 XKR?
This is where the receiving aerial is located. (iii) Check the connections on your Security Locking Module are clean and show no sign of corrosion. The Security Locking Module (SLM) is located inside the boot. To find it, open the boot and remove the battery cover. There is a fuse box assembly next to the battery.
How to program remote fob for Jaguar XK8 XKR?
Auto Reserve Jaguar – XK8 XKR Remote Fob Programming – Detailed Instructions: The procedure to program the remote fob or fobs is very simple and should take less than one minute. No tools are required. All remote fobs available must be present when the car is in programming mode, so that they can be programmed at the same time as the new fob.
Enter the car and sit in the Drivers seat. 2. Place the key in the ignition. 3. Hold the headlight flasher arm back – the blue “high beam” light will come on the dashboard and the headlights will come on. 4. Keep holding the headlight flasher back and turn the ignition key to position 1.
To find it, open the boot and remove the battery cover. There is a fuse box assembly next to the battery. Remove the 3 x 10mm bolts holding the fusebox carrier. The SLM is underneath the fusebox carrier. Q: I have programmed the fobs successfully, but when I press the button to lock the car nothing happens!
This is where the receiving aerial is located. (iii) Check the connections on your Security Locking Module are clean and show no sign of corrosion. The Security Locking Module (SLM) is located inside the boot. To find it, open the boot and remove the battery cover. There is a fuse box assembly next to the battery.