How to do an OBD drive cycle on a Jaguar?

Heated Oxygen Sensors Monitor Drive Cycle. Start engine and bring to normal operating temperature > 82 °C (180 °F). Drive the vehicle steadily between 48 – 97 km/h (30 – 60 mph) for 10 minutes. Drive the vehicle above 3000 rpm in 4th gear at a steady speed. Lift foot completely off accelerator and coast for 30 seconds.

What should the engine temperature be in a Jaguar OBD-2?

Oxygen sensor heaters: Start engine and bring to normal operating temperature > 82 °C (180 °F). Idle engine for 3 minutes. Start engine and bring to normal operating temperature > 82 °C (180 °F). Idle for a minimum of 10 minutes.

What are the features of the Jaguar XJ?

How to use your XJ’s Automatic Headlights and Intelligent High Beam Assist feature – set your headlights so they automatically illuminate in poor conditions and dip for oncoming or followed vehicles. A guide to XJ’s multimedia system which incorporates an 8″ multi-functional Touchscreen.

Is there a video guide for the Jaguar XE?

These video guides take you through the most important features of your XE. An instructional video showing how to top up XE’s Diesel Exhaust Fluid (DEF), also known as AdBlue®, AUS 32 or ARLA 32. How to use XE’s Surround Camera System, which gives you a near 360 degree view for safer and easier manoeuvring.

What’s the drive cycle for a Jaguar XJ?

1. Start engine and bring to normal operating temperature, above 180 F. 2. Drive vehicle steadily keeping the RPMs between 1700 – 2500 for 5 minutes. 1. Ensure your Jaguar’s fuel filler cap (gas cap) is fully closed.

What are the upstream sensors on a Jaguar XJ?

Upstream (Universal) oxygen sensors: 1. Ensure the engine is off and cooling fans are inoperative (not running) for less then 20 seconds. 2. Start the engine and bring it to normal operating temperature, above 180 F. This should be achieved when you notice the engine temperature gauge near center. 3. Begin driving.

When did the Jaguar X type go out of production?

The X-Type was Jaguar’s best selling model during almost all its production run, but sales did not meet projections, peaking at 50,000 in 2003.

Is the Jaguar X type a front wheel drive car?

Instead, the X-type used a modified version of the front-drive Ford CD132 platform shared with the contemporary Ford Mondeo — with the addition of all-wheel drive (marketed as Jaguar Traction or Jaguar Traction 4) and handling and steering engineered to minimise front-wheel drive torque-steer.

How to run an oxygen sensor in a Jaguar?

Downstream oxygen sensors: Start engine and bring to normal operating temperature > 82 °C (180 °F). Drive the vehicle steadily between 48 – 97 km/h (30 – 60 mph) for 10 minutes. Drive the vehicle above 3000 rpm in 4th gear at a steady speed. Lift foot completely off accelerator and coast for 30 seconds. Oxygen sensor heaters:

Is the 2003 Jaguar X Type A good car?

Take our quiz & meet the car you’ll love. Have You Driven the 2003 Jaguar X-Type? This is a great auto. The faster you go the better it handles. By far the best buy in a sports car for your dollar compared to BMW and Audi. Be very carefull of the 2.5. The trans will go on all of them and this is right from the Jag dealer.

Where did I buy a 2003 JAG X?

I bought my 2003 Jag X model this month (11/2016) from a used car dealer that sold it “as is”. I had to put some money into some fixes from the start and so any negatives there have to do mainly with the previous owner just letting things go and the auto dealer doing a little but not much to help.

Which is the best Nav system for a Jaguar?

The nav system was rated the best for all vehicles built in 2003. I did get it. Overall, after having driven it 140k miles to date, I plan on driving it a few more years. Normal wear and tear and has been maintained by my local Jaguar Dealer since new.

How long does it take to get a new Jaguar X type?

It took 4 weeks to get another in as there were so many being changed that they were on back order. The way to go is with the 3.0 with the sport package. This is hard to find as they are such good cars that no one wants to get rid of them. Best chance is to ask the dealer if one is coming off a lease and for them to let you know when it arrives.

Where is the OBD connector on a Jaguar XJ?

OBD connector location for Jaguar XJ (X300/X308/X350/X358) (1994 – 2009) RHD You will find below several pictures which will help you find your OBD connector in your car. The OBD II socket is located at the left of the pedals Go to the OBD2

How to repair a Jaguar X350 DTC OBD II?

1 Start engine and bring to normal operating temperature > 82 °C (180 °F). 2 Drive the vehicle steadily between 48 – 97 km/h (30 – 60 mph) for 10 minutes. 3 Drive the vehicle above 3000 rpm in 3rd gear at a steady speed. Lift foot completely off accelerator and coast for 30 seconds. Oxygen sensor heaters:

How do you reset the EPB on a Jaguar?

This indicates that the parking brake is in calibration mode. 5. Lightly press the footbrake pedal. 6. Apply the parking brake by using the EPB switch. 7. Release the parking brake. 8. Release the footbrake.

How does the EVAP system work in a Jaguar?

Drive vehicle to the road where the EVAP System Drive Cycle will be conducted. Stop vehicle and switch OFF the ignition. Leave ignition OFF for 30 seconds, then restart the engine. Accelerate briskly to 80 km/h (50 mph) ensuring that the engine speed reaches a minimum of 3500 rpm for a minimum of 5 seconds.

When do you turn off the oxygen sensors on a Jaguar?

Upstream (Universal) oxygen sensors: Engine OFF; cooling fans inoperative > 20 seconds. Start engine and bring to normal operating temperature > 82 °C (180 °F). Drive the vehicle between 3000 – 4000 rpm at a steady speed. Lift foot completely off accelerator and coast to a stop within 30 seconds.

What does a P1000 DTC mean on a Jaguar?

A P1000 DTC in Jaguars means that the trouble codes have been recently cleared but not all of the drive cycles have been completed. If you note a P1111 DTC after clearing the codes, then that means that the drive cycles have been completed.

When did the Jaguar X type Driver’s Handbook come out?

Foreword Jaguar X-TYPE Driver’s Handbook Published January 2003 by Technical Service and Communications Jaguar Cars LimitedPublication Part No. JJM 18 02 20/35 JAGUAR CARS LIMITED, as manufacturer, is dedicated to the design and production of vehicles which meet the expectations of the world’s most discerning purchasers.

Can a Jaguar X-type be changed at any time?

For the specification of a particular vehicle, owners should consult their Jaguar Retailer. The manufacturer reserves the right to vary its specifications with or without notice, and at such times and in such manner as it thinks fit.

How to reset the ecu-1 Jaguar car forum?

Restart the clock (where fitted) and set it to the correct time. Simultaneously press “>>” “PTY” “A.MEM” should only take 2 or 3 seconds and the radio turns on. 1. NOTE: After the battery has been disconnected it is necessary to

What happens when you disconnect the battery on a Jaguar?

When the battery is disconnected, these adaptations are lost. On reconnection, therefore, some slightly abnormal drive symptoms may occur and the vehicle may need to be driven10 miles (16 kilometres) or more while the control system re-adapts. this is a simple link for resets after battery disconnect.

When to deactivate the check engine Mil in a Jaguar?

If on the first trip, the misfire is severe enough to cause catalyst damage (more severe than excess exhaust emission), the CHECK ENGINE MIL will flash while the fault is present and the individual cylinder DTC plus DTC P1313 (bank 1), DTC P1314 (bank 2) will be logged. When the fault is no longer present the MIL will be deactivated.

Navigation