What does level ride air suspension system do?
Level Ride Air Suspension The Level Ride Air Suspension System manages the height and pressure for pneumatic or hydraulic suspension, providing the most accurate control in the air suspension market (a rear-only system is also available).
What to do if your air suspension is not working?
Air-Suspension Switch. If the back of the car is low, indicating that the air suspension is not working, and the air suspension light is on, check the fuse. If the fuse is all right, make sure the air-suspension switch in the trunk is on. This switch is used when the car is in for service.
How to troubleshoot a Lincoln Town Car air suspension?
Turn the air suspension switch to the “On” position. Use the circuit tester to check for power at the leveling switch. If there is power, turn the air-suspension switch to “Off” and lower the car. Access the air compressor in the front, under the hood, and check the electrical connector for power. If there is power, check for a good ground.
What happens when Mercedes Benz air suspension stops working?
When they stop working the air suspension control unit may no longer be able to recognize the height of the car. Your Mercedes-Benz will greet you with a warning message on the dash related to the airmatic failure. The car height may be correct and the car still rides fine, it’s just that the computer doesn’t know that.
What are the most common problems with air suspensions?
A faulty compressor is also a very common problem with an air suspension. As we just went over, the compressor works to keep the air springs inflated. Oftentimes, a compressor malfunctions because it’s overworked, meaning that it runs more often than usual.
How do you check the air suspension on a car?
Check for Power. Turn on the ignition. Turn the air suspension switch to the “On” position. Use the circuit tester to check for power at the leveling switch. If there is power, turn the air-suspension switch to “Off” and lower the car. Access the air compressor in the front, under the hood, and check the electrical connector for power.
When to turn off the rear air suspension?
This switch is used when the car is in for service. Always turn off the switch before lifting the car, because the sensor will think the car is rising and keep the air bag valves open, ruining the rear air suspension. Turn the ignition key with the engine off, and listen for the compressor to come on while pushing down on the rear bumper.
How to know if air suspension bags are inflating?
New drivers start at 26% of load gross. Be patient, run hard , work hard, and you will make good money. Be lazy, and you won’t. First visually check the linkage on the leveling valve to make sure it’s connected and not bent/broken and listen for air leaks. Then make sure you have air pressure to the leveling valve.