How to release parking brake?
Parking Brake. While stepping down on the brake pedal, pull up the parking brake lever as far as it will go. To release, raise the lever up slightly, and while pushing the button, return it completely to its lowered position.
Where is the parking brake on a Jaguar XJR?
BRAKE’ is displayed on the instrument cluster message center. This indicates that the parking brake is in calibration mode. 5. Lightly press the footbrake pedal. 6. Apply the parking brake by using the EPB switch. 7. Release the parking brake.
Why is my handbrake not working on my Jaguar XJR?
It also seems worse when the car has been sat for a while and gradually gets better with regular use. Mostly it’s operating, displaying a fault and then releasing. It feels like the pads are not being applied strongly enough and the torque is easily overcoming the resistance.
What should I do if my Jaguar footbrake is not calibrated?
Workshop Manual Section 414-01. c. Reconnect the battery. 2. Start the engine. 3. Firmly apply and release the footbrake five times. 4. Confirm that the message ‘NOT CALIBRATED’ or ‘APPLY FOOT AND PARK BRAKE’ is displayed on the instrument cluster message center. This indicates that the parking brake is in calibration mode. 5.
Why does my Jaguar have a restricted performance error?
What is the Jaguar Restricted Performance error? With the Restricted Performance error message, the car is indicating that the engine management system has gone into a “limp” mode to protect certain systems and components. This changes depending on the system or components being protected.
Why is my XJR having a parking break fault?
Here is what it states. On some 2004 MY-on XJ range vehicles, a customer may report a concern of premature parking brake pad wear or the brakes binding. This condition can result if the electronic park brake (EPB) system is not re-calibrated after the removal of the rear brake calipers to replace the brake pads.
What’s the park brake fault on a 2007 XJ?
I am new to this forum but am really frustrated with my 2007 XJ as it has let me down twice this week in the snow. The fault on rhe dash read Park Brake Fault and the brake warning light is lit. then when you sellect park it won’t let you out again and you have to get recovered.
How to apply parking brake on 2006 XJR?
Confirm that the message “NOT CALIBRATED” or “APPLY FOOT AND PARK BRAKE” is displayed on the instrument cluster message center. This indicates that the parking brake is in calibration mode. 5. Lightly press the footbrake pedal. 6. Apply the parking brake by using the EPB switch. 7. Release the parking brake. 8. Release the footbrake. 9.
What’s the problem with the park brake on a Jaguar?
Same problem as Scaf’s: had some excessive wheelspin leaving the house this evening due to compacted snow and ice, and two faults came up, ‘parkbrake’ and ‘ABS’. I made the mistake of stopping and turning the engine off to see if the faults would clear but they didn’t.