How to upgrade the convertible top on a Jaguar XK8?
Jaguar XK/XKR Hydraulic Convertible Top Upgrade Instructions Background Information: This upgrade kit is designed for the Jaguar XK8/XKR model years 1996-2005. The automatic convertible top in these model years is operated by a hydraulic system manufactured for Jaguar by the Power Packer company.
Where can I Find my Jaguar XK8 front seat?
To find your Jaguar XK8 Front Seat from a RECYCLER NEAR YOU, just enter the YEAR of your vehicle and your ZIP code in the above form and press the “FIND” button. (What you see below is a previous search for a Jaguar XK8 Front Seat and does not include all the Front Seats in YOUR area.) This part is also known as Jaguar XK8 Seat, Front.
What kind of hydraulic system does a Jaguar XK8 have?
Hydraulic System Upgrade for 1996-2006 Jaguar XKR/XK8. Hydraulic System Upgrade for your 1996-2006 Jaguar XKR/XK8, excluding pump. Includes Rebuild Service for the set of 3 Hydraulic Cylinders/Rams, and a Full Set of 6 Replacement Hydraulic Lines/Hoses.
Why is my Jaguar XK hydraulic top not working?
If the reservoir level is persistently going down and requires periodic attention, then the cause is probably a leaking lift cylinder. The leak occurs in the seals that ride on the shaft as it goes in and out to raise and lower the top. A quantity of oil is lost during each roof operation. Jaguar XK Hydraulic Upgrade Kit Contents:
Jaguar XK/XKR Hydraulic Convertible Top Upgrade Instructions Background Information: This upgrade kit is designed for the Jaguar XK8/XKR model years 1996-2005. The automatic convertible top in these model years is operated by a hydraulic system manufactured for Jaguar by the Power Packer company.
What kind of oil is in Jaguar XK8?
At the front of the reservoir is a hard lump of what started out as Jaguar hydraulic oil, circa 1998. We already know the old hydraulic fluid was prone to thicken and solidify in chunks. What we now know is that those chunks get into the seals of the rams and latch, and chew them up.
Are there any problems with the Jaguar XK8?
During the past six months three early XK8 Jaguar convertibles came into Robison Service with slow convertible top complaints. Two cars were leak free; the third was showing the familiar hydraulic oil drip from the header bar.
Where to find chf11s fluid in Jaguar XK8?
The first clue can be seen in one of the pump reservoirs, shown after thorough flushing and change to CHF11S fluid. You can see the fresh CHF fluid as green liquid in the bottom of the reservoir. Above that, lining the bottom of the reservoir, you see a slimy mix of the two fluids.
How to flush hydraulic fluid on Jaguar XK8?
Flush Hydraulic Fluid to Fix Problems Opening/Closing Convertible Top on Jaguar XK8 Problem Description Problems when opening or closing the convertible top may be fixed by flushing the hydraulic fluid and replacing it with an improved Jaguar fluid.
At the front of the reservoir is a hard lump of what started out as Jaguar hydraulic oil, circa 1998. We already know the old hydraulic fluid was prone to thicken and solidify in chunks. What we now know is that those chunks get into the seals of the rams and latch, and chew them up.
During the past six months three early XK8 Jaguar convertibles came into Robison Service with slow convertible top complaints. Two cars were leak free; the third was showing the familiar hydraulic oil drip from the header bar.
Who is the manufacturer of the Jaguar convertible top?
The automatic convertible top in these model years is operated by a hydraulic system manufactured for Jaguar by the Power Packer company. Power Packer is the primary designer and manufacturer of convertible top systems that are also used by Mercedes and BMW, plus many others. This system has suffered from a variety of premature failures.
How to install a hydraulic top on a Jaguar XK?
2. Pull the fascia out and fold it flat against the floor of the trunk compartment. Put the catch pan on top of the folded fascia to hold the pump assembly during installation. a. Use the T30 bit with a ¼ drive socket (or right angle T30 if available) to remove the two screws that hold the pump in place. b.
What causes oil leak on Jaguar XK roof?
The leak occurs in the seals that ride on the shaft as it goes in and out to raise and lower the top. A quantity of oil is lost during each roof operation. Jaguar XK Hydraulic Upgrade Kit Contents:
The automatic convertible top in these model years is operated by a hydraulic system manufactured for Jaguar by the Power Packer company. Power Packer is the primary designer and manufacturer of convertible top systems that are also used by Mercedes and BMW, plus many others. This system has suffered from a variety of premature failures.
Why is my soft top on my Jaguar XK not working?
This video will show you the first thing to check when your convertible top on a Jaguar XK or XKR is not working. This is a commonly overlooked issue when the Jaguar soft top is not working. There are more details if you need it in the owner’s manual. Feel free to reach out to me if this does not work for you or you need more help. Loading…
2. Pull the fascia out and fold it flat against the floor of the trunk compartment. Put the catch pan on top of the folded fascia to hold the pump assembly during installation. a. Use the T30 bit with a ¼ drive socket (or right angle T30 if available) to remove the two screws that hold the pump in place. b.
How to remove and reinst Alling XK8 engine 1?
REMOVING & REINST ALLING XK8 ENGINE 1. Park the vehicle on a 4 post lift; select ‘neutral’; lower both windows at least 25 mm (1 inch) before switching the ignition ‘off’; release the hood latch. Depress the switch to release the trunk lid latch. Leave the handbrake ‘off’.
How to remove the trim panel on a jagrepair XJ6?
Remove the trim panel by lifting it from beneath the rear plastic valence (Fig. 2b) and slowly pulling it from the rear toward the front (Fig. 2c). As with the XK8, it is not necessary to remove the plastic valence at the rear of the trunk. Fig. 2b XJ6 Fig. 2c XJ6
How to remove ABS module from Jaguar XK8?
Position an absorbent cloth underneath the brake control modulator to collect brake fluid spillage. CAUTION: Remove brake fluid spillage immediately from paint work, with clean water. NOTE: To minimize brake fluid loss, release the brake tubes in the order shown. 9. Release brake tubes.
What’s the test box on a Jaguar XK8?
Test box used to check the operation of the XK8 roof operation. A modification to give access to the boot. Information on Nikasil and how to identify if you have a Nikasil engine block.
Remove the trim panel by lifting it from beneath the rear plastic valence (Fig. 2b) and slowly pulling it from the rear toward the front (Fig. 2c). As with the XK8, it is not necessary to remove the plastic valence at the rear of the trunk. Fig. 2b XJ6 Fig. 2c XJ6
Can you replace the rear view mirror on a Jaguar XJ8?
Be extraordinarily careful when replacing the rear view mirror on the XJ8, XK8 and XJ6 as the windshield can crack very easily. I did it (see below) but would recommend taking it to a windshield installer and have the old mirror removed and new one installed. The procedure is gut wrenching and nerve racking. Here goes:
What kind of gas mileage does a 1997 Jaguar XK8 get?
fuel consumption and mileage: 12.1 l/100km / 23.3 mpg (imp.) / 19.4 mpg (U.S.) / 8.3 km/l EU-cycle; average estimated by a-c©: 13.6 l/100km / 20.8 mpg (imp.) / 17.3 mpg (U.S.) / 7.3 km/l, more data: 1997 Jaguar XK8 Convertible (aut. 5) Specifications Review 1997 Jaguar XK8 Convertible (aut. 5) specs Jaguar XK8 Convertible (aut.
Why is my Jaguar XK8 convertible top slow?
Issue: early XK8 Convertibles may experience slow operation of the convertible top, or slow or erratic operation of the latch. These conditions are caused by a tendency of the Univis hydraulic fluid in the system to slowly evaporate, and in certain conditions to gel within the hydraulic system pipes and hoses.
What was the transmission fault on a 1998 Jaguar XK8?
Jaguar XK8: 1998 Jaguar XK8 Transmission Fault. Code came… Transmission started to go in first, made a clunk, then threw a CEL and Transmission Fault light. OBD codes came up P1722 Stall Speed … read more Vocational, Technical or Tra… 97 Jaguar XK8. When stopped at a stoplight (slightly upgrade 39;97 Jaguar XK8.
What to do if your Jaguar XK8 has hydraulic problems?
All of a sudden you have thin, fast moving oil flowing through the system. As the chunky old fluid is washed away, leaks appear. The solution: Replace the lines, rebuild the rams, and rebuild the latch and pump. All the chunky old oil has to go, as do all the seals, and total rebuild is the only way to accomplish that.
Why is my Jaguar XK8 window not working?
A simple painless fix. This is the normal function of the Jaguar XK8 convertibles cars,door windows. Each time you pull up on the outside door handle the window will automatically lower by about a inch. The reason for this design is to clear the door glass from the convertible top once you open your door.
What’s the price of a new Jaguar XK8?
A vast range of options and extras was offered, and the build totals were: XK8 Coupé 19,748, XK8 Convertible 46,760, XKR Coupé 9661, XKR Convertible 13,895. Decide which model, colours and trim specs appeal, then look carefully. Not all dealers know XK specs, so shop around; you may find a top-end car at standard book price.
When did they change the tensioners on the Jaguar XK8?
They were improved in 2002, and a durable metal alternative was fitted from 2005. If there’s no proof of replacement on earlier units, they should be checked. Upper tensioners (x2) are fairly easy to change; the lower one is trickier, so listen carefully for any untoward noises.
Can a Jaguar XK8 be converted to a V8?
LS1 LSx V8 Conversion for Jaguar XK8 XKR 97-02 (Convertible & Coupe) Building on our experience from the XJ8 LS1 conversion, we took on a similar project with a 98 XK8 convertible. This was a local one owner, 97k original miles car with a skipped timing chain that trashed the engine. Bad for them, good for us.
When did the Jaguar XK8 Silverstone come out?
Jaguar also produced a number of limited editions before the XK8 was superseded by a brand-new aluminium-bodied replacement in 2005. First of these now very sought after specials was the XKR Silverstone, launched to celebrate Jaguar’s entry into Formula One in 2000. A total of 563 were built, although only 107 remained in the UK.
Why does the Jaguar XK8 sit so high?
Look closely and you’ll see that the XK8 sits amazingly high for a sports car and this was due to the need to fi t snow chains in certain markets. Lowered, sportier springs are available to make the handling tighter, but this will spoil the ride.
What kind of tyres does a Jaguar XK8 use?
Pirelli P-Zero 245/50 ZR17 tyres were fitted originally, but 245/45 ZR18s up front and 255/45 ZR18s at the rear were later options (standard with CATS active suspension). Any car should have taut handling and a supple ride at speed.
What kind of hydraulic hose does a Jaguar XK8 use?
This information on the hydraulic hose, latch and lifts and will cover XK8 XKR MY 1997 to 2006. Several years ago I had a hydraulic hose fail that operates my roof on my 1999 xk8.
How do you fix a roof on a Jaguar XK8?
Pull that plug and insert the allen wrench and rotate to unlatch (open) the roof latch. Pull the roof up to the latch then close the latch with the allen wrench. Once the roof is up and latched you will need to lock the rams for the rear quarter windows to close. The attached illustration of the ram linkage shows how to unlock them.
This video will show you the first thing to check when your convertible top on a Jaguar XK or XKR is not working. This is a commonly overlooked issue when the Jaguar soft top is not working. There are more details if you need it in the owner’s manual. Feel free to reach out to me if this does not work for you or you need more help. Loading…
Where is the hydraulic valve on a Jaguar XK?
Position the Hydraulic Valve on the top side of the pump motor with the pointed end toward the front of the car and fasten the other end of Hose 2 to Valve Port 2 and tighten with the 11/16 wrench. Refer to Figure 5. 12. Adjust the position of the Valve and hoses to be on top of the motor with the pointed end toward the front of the car.
Position the Hydraulic Valve on the top side of the pump motor with the pointed end toward the front of the car and fasten the other end of Hose 2 to Valve Port 2 and tighten with the 11/16 wrench. Refer to Figure 5. 12. Adjust the position of the Valve and hoses to be on top of the motor with the pointed end toward the front of the car.
Can a convertible top be replaced on a Jaguar?
This guarantees that your top will be manufactured with the correct weight, texture, and color, to keep your convertible looking its best. Our Jaguar convertible tops are 100% GUARANTEED to fit perfectly to your vehicle right out of the box or we will either replace the item or refund your purchase price.
What kind of car is a Jaguar XK 8?
Jaguar XK 8 convertible (2001) 90600 miles, a fast appreciating iconic modern classic finished in metallic black with a full leather interior,multi disc AM/FM stereo power seats memory steering and seat function, climate control, trip computer, condition very good given its age and as per photos selling on behalf of …
How does the convertible top work on a Jaguar?
When the convertible top has fully raised it will touch the latch claw which will switch to be sent. The SLCM switches off the ‘Latch Control Valve’; and the claw pulls the convertible top in place. 7. When the latch has closed ‘Convertible top closed switch’ and ‘Convertible top latch closed sound the alarm chime, and raise the front windows. 8.
How do you open the convertible top on a Jaguar?
Pressing the convertible top switch will signal the Body Processor Module (BPM) to send a ‘Open Convertible top’ signal to the Security and Locking Module (SLCM). The SLCM convertible top is about to open. (Note: the rear quarter windows will be powered for a maximum of 3 seconds). 3. If the front windows are closed they will be opened slightly.
What does close convertible top signal on jagrepair?
‘Close Convertible top’ signal to the Security and Locking Control Module (SLCM). The SLCM will sound the chime alarm to warn that the convertible top is about to close. 3. If the front windows are closed they will be opened slightly. The SLCM will turn on the ‘top
Where are the switches on a Jaguar roof?
It is possible but not practical. If all is working properly and you insist in operating the roof manually you will need to understand how it works. This roof is both electrical and hydraulic and all must be working properly and in sequence. The switches are 3 located in the header and 2 located in the right rear ram.
What happens if you replace a module on a Jaguar?
If functionality has returned than it is safe to say the module you replaced has a problem. What has been found in the past is that is that the circuit board becomes worn and the process will sever the connections on the board.
Where is the Hyd pump on a Jaguar XK8?
Along the rear under the rear seat from the console to the right rear Hyd cylinder where it goes to the rear compartment to the Hyd pump. NOTE: This is for a 99 xk8. The ’07 and up XK convertible top is completely different from the ’97-’06 cars Removed the rear seat 2 nuts located at the floor, and rear seat back 2 screws at the bottom.
What should I do if my XK8 convertible top leaks?
The lesson for owners of pre-2000 XK8 convertibles: If you have trouble with the top, be prepared for the possibility of leaks after flush, and if that happens, rebuild the whole thing and have done with it because the alternative will be replacing everything one part at a time, which will cost you a lot more in the end.
Where are the hydraulic hoses on a Jaguar XK?
Adjust the position of the Valve and hoses to be on top of the motor with the pointed end toward the front of the car. Thread the included wire ties under the hoses and around the motor body and the valve. One tie can pass through the two recessed spots in the Valve Body.
The lesson for owners of pre-2000 XK8 convertibles: If you have trouble with the top, be prepared for the possibility of leaks after flush, and if that happens, rebuild the whole thing and have done with it because the alternative will be replacing everything one part at a time, which will cost you a lot more in the end.
How do you replace the rear window regulator on An XK8?
Remove the rear quarter casing by freeing the two clips at the front edge (see Fig. 8) and pulling the casing forward along with the rear tang located in a positioning hole in the body. Position the casing toward the center of the car and out of the way (see Fig. 9).
How do you replace a fuel pump in a Jaguar XK8?
On the inside you need to remove the tank filler latch (not shown). To do this hold the latch inside the trunk and on the outside just turn nut about a ¼ of a turn and it will come out. It is a bayonet type connection. Once that is removed, disconnect the 2 drain hoses.