Menu

Navigation

What does DSC system Fault mean on a Jaguar?

Posted on by Arif Clayton

What does DSC system Fault mean on a Jaguar?

When dsc system fault message comes on it means that it has found a fault in one of these systems and has disabled the dsc system. It needs to be hooked up to a jaguar diagnostic system so that the dsc system/network can be scanned for trouble codes and diagnosed.

What causes DSC Fault?

What Causes DSC Problems? Because the DSC system relies so heavily on knowing what’s going on in and around the car, many times issues with is come as a result of failing sensors. You could have issues with your steering angle sensor, or wheel speed sensor, either of which could need to be replaced.

What is DSC Fault?

The Dynamic Stability Control (DSC) warning light may be simply a dirty or failed wheel speed sensor. The most common cause for the DSC coming on is a speed sensor at one of the wheels not working properly. The Check Engine Light comes on anytime a critical system is having a problem.

Should DSC light be on or off?

This is completely normal, and as long as the DSC light turns off, you’re good to go. From there, the DSC light will turn on and stay on if there is a problem in the system. If the DSC light stays on, that’s when you should consider taking your vehicle to a mechanic.

Can a DSC system fault be found on a Jaguar?

Chelmsford Carriage Company stuck her on diagnostic but typically the light stayed resolutely off and no fault was found. They’ve referred me to an auto electrical specialist but before I part with yet more of my hard-earned I wondered if anyone here had similar experience and/or ideas?

When do I get the DSC system fault warning?

I’ve started getting the “DSC System Fault” message and warning light intermittently. Sometimes it appears while I’m driving, sometimes on startup. If I turn everything off and restart the car it sometimes clears.

Why is my DSC not working in my car?

Sometimes it appears while I’m driving, sometimes on startup. If I turn everything off and restart the car it sometimes clears. It seems to be more frequent when it is raining – and without DSC (IE: Traction control) the car is a bit lairy in the wet, especially as I need to get the tyres replaced anyway (had to wait for payday on that one).

Chelmsford Carriage Company stuck her on diagnostic but typically the light stayed resolutely off and no fault was found. They’ve referred me to an auto electrical specialist but before I part with yet more of my hard-earned I wondered if anyone here had similar experience and/or ideas?

Why is my XF Jaguar 3.0L not shifting?

Click to expand… I own a 2010 xf jaguar 3.0l automatic recently the gearshift could not come out and I phoned the dealership and they advised to replace the whole module which I did. Then after the module the car started taking too long intermetantely to shift.

What causes a fault on the DSC system?

Common fault for DSC errors is a fault on the ABS sensors. The front ones are usually the problem and it is the loom rather than the sensor. Check for wear/damage to the loom. Can often trigger on full lock as this stretches the cable most

What causes a transmission fault in a Jaguar?

It’s also possible you have a leak so the compressor is unable to maintain the ride height as the compressor has a on/off duty cycle to stop it burning itself out. Sadly the compressor failure is the more common fault.

What does DSC system fault mean on a Jaguar?

Posted on by Arif Clayton

What does DSC system fault mean on a Jaguar?

The abs light came on and the dsc fault. The code shows 1155 which is the left front abs sensor. I swaped LF with … read more Vocational, Technical or Tra… Vocational, Technical or Tra… Vocational, Technical or Tra… Vocational, Technical or Tra… 2004 XJ8: engine continued running but the car will not move. I have a Jaguar 2004 XJ8.

What is the diagnostic code for a Jaguar check engine light?

Refer to our Generic OBD II code list for definitions on all other Jaguar diagnostic trouble codes. Manufacturer Specific Codes P1000OBD Systems Readiness Test Not Complete P1104Mass Air Flow Sensor Circuit Ground – Read Our Article On Automotive Circuit TestingFor Help With This Jaguar Check Engine Light Code P1111System Pass

What causes a fault on the DSC system?

Common fault for DSC errors is a fault on the ABS sensors. The front ones are usually the problem and it is the loom rather than the sensor. Check for wear/damage to the loom. Can often trigger on full lock as this stretches the cable most

Is the computer control of the ASC damaged?

I took it to the dealer they told me that the computer control of the ASC is damaged (a small device under the radio console, beside the acceleration pedal ) and that this is the first time they see this problem. Is this the real problem or there is another cause? If this is the real problem is it possible to repair this device?

When do I get the DSC system fault warning?

I’ve started getting the “DSC System Fault” message and warning light intermittently. Sometimes it appears while I’m driving, sometimes on startup. If I turn everything off and restart the car it sometimes clears.

Why is my DSC not working in my car?

Sometimes it appears while I’m driving, sometimes on startup. If I turn everything off and restart the car it sometimes clears. It seems to be more frequent when it is raining – and without DSC (IE: Traction control) the car is a bit lairy in the wet, especially as I need to get the tyres replaced anyway (had to wait for payday on that one).