What happens when a p0358 ignition coil is set?
If an open or a short is detected in the driver circuit for coil #8, a P0358 may set. Also, depending on the vehicle, the PCM may also shut down the fuel injector to the cylinder also.
What does p035x stand for on a check engine light?
In addition to an illuminated check engine light, the most common symptom is an ignition misfire. Often, P035x codes will also be accompanied by a misfire code (P0300-P0308). How do you troubleshoot code P0358 ? The first still is to visually inspect the coil pack and its connector. Look for things like broken wires, corrosion, etc.
What are the codes for Ford E350 ignition coil?
My ford e350 2001 has these codes p0171 p0351 Ignition coil A primary/secondary circuit p0352B p0353C p0354D p0355E p0356F p0357G p0358H I take this to mean all my cop’s are bad… First signal I got was PO308. I changed all the coils and all the plugs. Now I get PO358. Where do I go from here?…
What are the symptoms of a p0358 DTC code?
Symptoms of a P0358 DTC may include: MIL (Malfunction indicator lamp) illumination Engine misfire may be present or intermittent Potential causes of a P0358 code include: Short to voltage or ground on COP driver circuit Open on COP driver circuit Loose connection at coil or broken connector locks Faulty Powertrain Control Module
When do I set the ignition coil code p0351?
The PCM sets an ignition coil control circuit code P0351-P0358 when it detects a problem with the ignition coil circuit. The last digit of these codes references the cylinder where the issue is occurring. For example, P0351 indicates a fault in the #1 cylinder coil circuit. Likewise, P0358 indicates a problem with the coil circuit on cylinder #8.
What causes a car to have a p0358 code?
Potential causes of a P0358 code include: Short to voltage or ground on COP driver circuit Open on COP driver circuit Loose connection at coil or broken connector locks Faulty Powertrain Control Module Is the engine misfiring presently? If not, the problem is likely intermittent.
In addition to an illuminated check engine light, the most common symptom is an ignition misfire. Often, P035x codes will also be accompanied by a misfire code (P0300-P0308). How do you troubleshoot code P0358 ? The first still is to visually inspect the coil pack and its connector. Look for things like broken wires, corrosion, etc.
Why do I have a rough idle after spark plug change?
Its possible you didn’t seat one of the coils all the way down on to the plug, or if you disconnected any of the harness from the coil packs then maybe it didn’t get plugged back up properly. Awesome! thank you sir, I was thinking that could very well be what is going on.