How do you reset the service interval on a lr4?
Here’s how to do it:
- Open the bonnet and the driver’s door.
- Place the ignition to the ON position without starting the engine.
- Fully depress and hold the BRAKE and GAS pedals for 30 seconds.
- Turn off the ignition and then start the engine to confirm the service light has been reset.
How do you reset the oil change light on a 2?
Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How do you reset a LR4?
Land Rover LR4 Oil Service Maintenance Reminder Light
- Turn the ignition on. Don’t start the engine.
- Open the hood and the driver side door.
- Step on the BRAKE PEDAL and GAS PEDAL at some time for 60 seconds.
- turn the key off.
How do you reset the oil service light on a Land Rover?
The oil service interval must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the wrench light on your Land Rover LR4: If your vehicle has an ignition button, press the Engine Start/Stop button once without touching the brake pedal.
Is there a required warning light reset for the Land Rover LR4?
2014-2016 Land Rover LR4 Service Required Warning Light Reset – Land Rover has introduced some new technology to the latest model LR4 2015. This latest model has a differentiator that can be seen in four colors on the exterior, bodyside, and 20-inch rim design. All these changes make the LR4 be very different from the previous 2014 facelift model.
What’s the difference between the 2014 Land Rover LR4?
All these changes make the LR4 be very different from the previous 2014 facelift model. Buyers can also take benefit from the new connectivity centered Suite Land Rover InControl app. With the increasing integration of smartphones, this system provides a new portal for satellite navigation, streaming media, Internet radio and other services.
How to turn off the oil service light 2014?
To turn off the Oil Service Light 2014 2015 2016 Land Rover LR4, conform to the following instructions: Turn the ignition key to position II, If your car has push-button start, press and hold the ” Start” for two seconds without touching the brake pedal.
The oil service interval must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the wrench light on your Land Rover LR4: If your vehicle has an ignition button, press the Engine Start/Stop button once without touching the brake pedal.
2014-2016 Land Rover LR4 Service Required Warning Light Reset – Land Rover has introduced some new technology to the latest model LR4 2015. This latest model has a differentiator that can be seen in four colors on the exterior, bodyside, and 20-inch rim design. All these changes make the LR4 be very different from the previous 2014 facelift model.
How to reset Inspection Service value on Land Rover?
• The information display will show ‘INSPECT’. • If the inspection service value reset is not required, press the trip reset button within 10 seconds of releasing it in step G and hold for less than 5 seconds and proceed to step K. This will by-pass the inspection service reset procedure.
How does the service interval work on a Land Rover?
The service interval is displayed for 3 seconds when the ignition is switched on. The service interval is reset by the dealer using T4 or a manual reset procedure and, once set, counts down the mileage and time in days to the next service.