Why does my 2012 Jaguar XF not start?
Hi, I own a 2012… Hi, I own a 2012 Jaguar XF. I replaced the battery and now when I try to start the car I hear a click and nothing happens. The battery is fully charged. Symptoms are my LED push start is not pulsating, but I am able to unlock the door with the smart key.
What does no crank / no start mean?
It started as a no crank/ no start (no click,dash lights came on and didn’t dim, only sound was fuel pump) about a month ago. Initially (when I hadn’t replaced anything yet) out of about 100 crank attempts, around the 80th attempt it randomly started up then died after a few seconds and wouldn’t crank or start again.
Can a 12V battery be used as a starter?
Like this one http://www.etrailer.com/static/images/pics/D/W/DW00254_2_1000.jpg Connections should be pristine. A battery can read 12 VDC, even 13+ VDC and however have not enough amps for the strong twist the starter demands, or just too weak to maintain the charge for a starter.
How to reset the battery after a flat battery?
5 Lightly press the foot brake. 6 Apply the parking brake by using the EPB switch. 7 Release the parking brake. 8 Release the foot brake. 9 Confirm that the brake warning lamp is no longer illuminated on the instrument pack and that “NOT CALIBRATED” message is no longer displayed in the message centre.
Do you have to reset your key fob after replacing the battery?
Click to see full answer. Then, do you have to reprogram key fob after changing battery? The key fob will need to be reprogrammed to the vehicle as when the battery was replaced in the key fob, the key was reset. This is why nothing is working with the key fob.
How to change the battery in a car?
Operate the window control switch once to the close position. 6. Repeat the door window motor initialization for each door window motor. Switch off ignition. 2 Disconnect battery for 30 seconds reconnect battery (not required if battery changed). 3 Start the engine.
Hi, I own a 2012… Hi, I own a 2012 Jaguar XF. I replaced the battery and now when I try to start the car I hear a click and nothing happens. The battery is fully charged. Symptoms are my LED push start is not pulsating, but I am able to unlock the door with the smart key.
5 Lightly press the foot brake. 6 Apply the parking brake by using the EPB switch. 7 Release the parking brake. 8 Release the foot brake. 9 Confirm that the brake warning lamp is no longer illuminated on the instrument pack and that “NOT CALIBRATED” message is no longer displayed in the message centre.
Click to see full answer. Then, do you have to reprogram key fob after changing battery? The key fob will need to be reprogrammed to the vehicle as when the battery was replaced in the key fob, the key was reset. This is why nothing is working with the key fob.
Operate the window control switch once to the close position. 6. Repeat the door window motor initialization for each door window motor. Switch off ignition. 2 Disconnect battery for 30 seconds reconnect battery (not required if battery changed). 3 Start the engine.