When to reset the clock on a Jaguar?
Refer to the audio systems handbook or touch-screen display handbook. • If the battery is disconnected for more than 72 hours the radio preset channels will need to be reset. • Reset the clock to the correct time.
How to reset the ecu-1 Jaguar car forum?
Restart the clock (where fitted) and set it to the correct time. Simultaneously press “>>” “PTY” “A.MEM” should only take 2 or 3 seconds and the radio turns on. 1. NOTE: After the battery has been disconnected it is necessary to
How to know if your Jaguar is on or off?
Raise hood and fit fender protection covers. Remove the intake duct. With assistance, visually observe throttle butterfly operation as the ignition is switched ‘ON’ for the first time. Throttle butterfly should fully close, then immediately open to the idle position. Did butterfly stick closed? Switch ignition ‘OFF’.
How to reset the battery in a Jaguar?
8 Release the foot brake. 9 Confirm that the brake warning lamp is no longer illuminated on the instrument pack and that “NOT CALIBRATED” message is no longer displayed in the message centre. 10 apply and release the EPB 5 times to ensure no error is present.
Refer to the audio systems handbook or touch-screen display handbook. • If the battery is disconnected for more than 72 hours the radio preset channels will need to be reset. • Reset the clock to the correct time.
Restart the clock (where fitted) and set it to the correct time. Simultaneously press “>>” “PTY” “A.MEM” should only take 2 or 3 seconds and the radio turns on. 1. NOTE: After the battery has been disconnected it is necessary to
8 Release the foot brake. 9 Confirm that the brake warning lamp is no longer illuminated on the instrument pack and that “NOT CALIBRATED” message is no longer displayed in the message centre. 10 apply and release the EPB 5 times to ensure no error is present.
How do you reset the trip computer on a Jaguar?
Drop each window to bottom, hold “down” button down for 5 seconds then lift the window. Has to be done one by one. • The trip computer will lose all recorded trip data and all trip functions will be reset to zero.
Drop each window to bottom, hold “down” button down for 5 seconds then lift the window. Has to be done one by one. • The trip computer will lose all recorded trip data and all trip functions will be reset to zero.