Where is the b2290 code on the airbag?
I unplugged the wiring to OCM (or occupant detection/ weight) sensor part#14B422 underneath the passenger seat, and then ofcourse U1900 came which says SRS module fault, but then I was able to erase the B2290 code, and not U1900.
What’s the code for the airbag warning light?
Airbag Light on with B2290 Code: It Has Airbag Warning Light Turns… It has airbag warning light turns on and passenger air bag light goes off, after few seconds of ignition/engine on.
What does code 22 mean on Ford airbag?
Code 22 (double flash, pause, two flashes) means the safing center output circuit has shorted to battery voltage, Code 23 (double flash, pause, three flashes) means the memory clear circuit is improperly grounded and Code 24 (double flash, pause, four flashes) means there is a system disarm failure or internal diagnostic monitor fault.
Is the SRS warning light an air bag code?
These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light. This is a computer controlled system designed to deploy one or more driver, passenger, and side airbags. How to read air bag codes ?
What is the Flash code on a Ford air bag?
Lamp flash code: 13 1.3 DTC B1317: Battery voltage high. Lamp flash code: continuous 1.4 DTC B1318: Battery voltage low. Lamp flash code: continuous 1.5 DTC B1342: Air bag control module is defective. Lamp flash code: 12 1.6 DTC B1869: Air bag warning indicator open circuit or short to ground.
What is the DTC b2292 error Flash code?
Lamp flash code: 33 1.19 DTC B2292 Error value 29: Driver safety belt pretensioner short to battery. Lamp flash code: 33 1.20 DTC B2292 Error value 28: Driver safety belt pretensioner short to ground. Lamp flash code: 33 1.21 DTC B2292 Error value 27: Passenger safety belt pretensioner circuit low resistance.
What is the DTC Flash code for an air bag?
Lamp flash code: 34 1.24 DTC B2292 Error value 24: Passenger safety belt pretensioner short to ground. Lamp flash code: 34 1.25 DTC B2293 Error value 31: Driver air bag first stage short to ground. Lamp flash code: 19 1.26 DTC B2293 Error value 30: Driver air bag first stage short to battery. Lamp flash code: 19
Why do I want to know the airbag code?
The only reason I ask is because I want to be sure it is the tensioner and not something else so I don’t start throwing money at the car. Could be the tensioner, could be the module. Since it’s only the one, I’d check the tensioner first.