What does the trouble code p0708 mean?
The P0708 trouble code means that the Engine Control Module (ECM) has detected a malfunction with the transmission range sensor. What are the causes of the P0708 code?
How to diagnose a p0708 Hyundai transmission switch short circuit?
Run the vehicle and confirm that the transaxle is set in each range when the selector lever is shifted to each position. The cost of diagnosing the P0708 HYUNDAI code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.
What does the p0708 transmission range sensor do?
The PCM or TCM uses the transmission range sensor, also called the inhibitor switch, to determine the position of the shift lever. If it receives signals that indicate two different gear positions at the same time for more than 30 seconds P0708 will be set.
What to do if your Hyundai p0705 breaks?
1. Place the selector lever in the “N” (Neutral) position. 2. Loosen the manual control lever lock nut to separate the cable and lever. 3. Place the manual control lever in the “N” (Neutral) position. 4.
Run the vehicle and confirm that the transaxle is set in each range when the selector lever is shifted to each position. The cost of diagnosing the P0708 HYUNDAI code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.
The PCM or TCM uses the transmission range sensor, also called the inhibitor switch, to determine the position of the shift lever. If it receives signals that indicate two different gear positions at the same time for more than 30 seconds P0708 will be set.
1. Place the selector lever in the “N” (Neutral) position. 2. Loosen the manual control lever lock nut to separate the cable and lever. 3. Place the manual control lever in the “N” (Neutral) position. 4.
What is the PNP switch on a Hyundai?
P0708 HYUNDAI Description. The park/neutral position (PNP) switch includes a transmission range switch. The transmission range switch detects the selector lever position when the shift lever is in the N or P shift position and sends a signal to the Transmission Control Module (TCM).
When does p0708 go into Fail Safe Mode?
If it receives signals that indicate two different gear positions at the same time for more than 30 seconds P0708 will be set. If this occurs twice in a row the check engine light will come on and the transmission will be commanded into “fail-safe” or “limp-home” mode.
How much does it cost to diagnose Ford p0708 code?
The cost to diagnose the P0708 FORD code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
The P0708 trouble code means that the Engine Control Module (ECM) has detected a malfunction with the transmission range sensor. What are the causes of the P0708 code?
The cost to diagnose the P0708 FORD code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
If it receives signals that indicate two different gear positions at the same time for more than 30 seconds P0708 will be set. If this occurs twice in a row the check engine light will come on and the transmission will be commanded into “fail-safe” or “limp-home” mode.
Is the check engine warning light illuminated with p0708?
Be aware that on most applications, the presence of only code P0708 will generally not cause the CHECK ENGINE warning light to be illuminated. However, what might happen is that the “OD” (Over drive) or other transmission related indicator light may start to blink or flash.
How much does it cost to repair a p0708 Ford?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P0708 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
Be aware that on most applications, the presence of only code P0708 will generally not cause the CHECK ENGINE warning light to be illuminated. However, what might happen is that the “OD” (Over drive) or other transmission related indicator light may start to blink or flash.
What is the diagnostic code for transmission range sensor high input?
P0708 is a diagnostic trouble code (DTC) for “Transmission Range Sensor Circuit High Input”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform the Check Engine Light diagnostic.
P0708 is a diagnostic trouble code (DTC) for “Transmission Range Sensor Circuit High Input”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform the Check Engine Light diagnostic.