How do you take the front seat out of a Hyundai Sonata?
- Remove front seat assembly.
- Remove the headrest.
- Push the clips (B) from the seat back panel (A).
- Push the protector (A) by the seat back frame.
- Disconnect the connector (A) mounting clip.
- Pull out the headrest guides (A) while pinching the end of the guides, and remove them.
- Remove the seat back from the frame.
How to repair the front seat on a Hyundai Sonata?
Repair procedures 1. Remove the seat assembly mounting cover. 2. After loosening the seat assembly mounting bolts, remove the seat assembly (A). 3. Disconnect the connectors (A). 4. Installation is the reverse of removal. Set the into the most rearward position.
What to do about front seat back cover on Hyundai Santa Fe?
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. Take care not to bend or scratch the trim and panels. 1. Remove the front seat assembly. 2.
How to remove the front seat back cover?
Turn the front seat back cover inside out. Then pull out the headrest guides (A) while pinching the upper part of the guides, and remove them. 16. Remove the front seat back cover (A) from the front seat back frame. 17. After removing the hog-ring clips (A) on the front of seat back and remove the front seat back cover (B). 18.
How do you remove the rear seat in a Kia?
If there are no bolts, you will lift the seat to remove it. If you can find no bolts, then try the following to remove the rear seat. Lift the front part of the seat to unlatch it. Move the seat cushion back towards the trunk, then lift. Install the seat in reverse order.
Repair procedures 1. Remove the seat assembly mounting cover. 2. After loosening the seat assembly mounting bolts, remove the seat assembly (A). 3. Disconnect the connectors (A). 4. Installation is the reverse of removal. Set the into the most rearward position.
If there are no bolts, you will lift the seat to remove it. If you can find no bolts, then try the following to remove the rear seat. Lift the front part of the seat to unlatch it. Move the seat cushion back towards the trunk, then lift. Install the seat in reverse order.
How to fix a Kia Optima front seat?
Set the seat into most forward position. Check that each slide is locked, and then Tighten the rear mounting bolt completely. Set the seat into the most rearward position. Check the front mounting bolt completely.
How to set the front seat on a Kia Sorento?
Set the seat into most forward position. Check that each slide is locked, and then Tighten the rear mounting bolt completely. Set the seat into the most rearward position. Check the front mounting bolt completely. Check that the seat operates to and fro smoothy and the locking portion locks properly. 1.