Why won t my truck go into gear?
The first culprit to suspect when your vehicle refuses to go into gear is low transmission fluid. Perhaps your fluid is leaking or low, and that may cause your car problems having a smooth gear transmission. You should be looking out for the level, smell and color of the fluid. If little, try adding some liquid.
Why does my car reverse but not go forward?
The gear cable could be stretched further than the normal length and requires adjusting. The failure of some internal components can be the cause too. The car will reverse but not go forward because of worn out solenoids, clutches, or gears.
Is there a problem with the gear box?
We had this car booked in today for almost impossible to engage first gear, all other gears were fine. The problem is stretched cables but a quick fix is possible. If you go to select reverse gear you will notice that once the gate is lifted that first is easily now selected. The rods will need a slight kink in them.
Where are the bushings on a Hyundai transmission?
Take a look at your bushings at the end of the shift cables at the transmission/gearbox. Here is a link to what im talking about http://www.hyundaiperformance.com/forums/maintenance-help/85542-1st-2nd-gear-shift-grind-may.html
What kind of gear box does Hyundai Accent GL 5 have?
It has 185k’s on the clock. It’s a 2002 hyundai accent gl 5 speed manual. Take a look at your bushings at the end of the shift cables at the transmission/gearbox. Here is a link to what im talking about http://www.hyundaiperformance.com/forums/maintenance-help/85542-1st-2nd-gear-shift-grind-may.html
What to do if your car won’t shift gears?
The mechanic will verify that the car’s transmission will not shift. This may require a test drive (if the transmission will not shift while moving). The mechanic may also need to pull diagnostic codes from the car’s computer via the OBD II connection under your dash. How important is this service?
How do you change gears in a manual transmission?
In a manual transmission, changing gears requires a working clutch pedal, clutch and other components. You press the clutch pedal, which engages the clutch and stops the transmission from spinning with the engine. This allows you to shift gears. Sequencers allow you to shift smoothly into each gear.
How can I Fix my manual gear box?
You will see two cables, get your hand in or use a tool and kink the left one up a few mm, do same with the right. Vac out the particles & this small adjustment should work. One will be the take keep of fluid and the other might be the brake fluid.
Take a look at your bushings at the end of the shift cables at the transmission/gearbox. Here is a link to what im talking about http://www.hyundaiperformance.com/forums/maintenance-help/85542-1st-2nd-gear-shift-grind-may.html