How many miles should rear brake discs last?
Recap. Brake pads should last anywhere between 25,000 and 60,000 miles, with brake discs lasting between 80,000 and 120,000 miles. There are lots of easy ways to make these last longer, such as gentle and engine braking.
How to remove the rear disc brake on a Hyundai Santa Fe?
Loosen the hose eyebolt (B) and caliper mounting bolts (C), then remove the rear caliper assembly (A). 3. Remove the rear brake disc by loosening the screws (A). 1. Remove the rear wheel & tire. 2. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. 3.
How can I repair my Hyundai Santa Fe?
1. Make sure the brake fluid in the reservoir is at the MAX (upper) level line. 2. Have someone slowly pump the brake pedal several times, and then apply pressure. 3.
How can I repair my Hyundai Elantra brake system?
Make sure the brake fluid in the reservoir is at the MAX (upper) level line. 2. Have someone slowly pump the brake pedal several times, and then apply pressure. 3. Loosen the right-rear brake bleed screw (A) to allow air to escape from the system. Then tighten the bleed screw securely. 4.
What should I do if my brake caliper is drained?
Replace the boots and seals with new ones whenever the brake caliper is disassembled. Do not reuse the drained fluid. Always use genuine DOT3/DOT4 brake Fluid. Using a non-genuine DOT3/DOT4 brake fluid can cause corrosion and decrease the life of the system. Make sure no dirt or other foreign matter is allowed to contaminate the brake fluid.
How can I Fix my brake system on my Hyundai Santa Fe?
Add fluid as required. 1. Make sure the brake fluid in the reservoir is at the MAX (upper) level line. 2. Have someone slowly pump the brake pedal several times, and then apply pressure. 3. Loosen the right-rear brake bleed screw (A) to allow air to escape from the system. Then tighten the bleed screw securely. 4.
Make sure the brake fluid in the reservoir is at the MAX (upper) level line. 2. Have someone slowly pump the brake pedal several times, and then apply pressure. 3. Loosen the right-rear brake bleed screw (A) to allow air to escape from the system. Then tighten the bleed screw securely. 4.
What do I need to replace front brake rotors?
If you choose front brake rotors, both front wheels will get new rotors. This service comes with brake pads. Unless brake pads were replaced recently, pads must be replaced while replacing the rotors. Measure the thickness of brake rotors. Remove and replace rotors and pads. Perform a brake safety inspection. Perform test drive.
Replace the boots and seals with new ones whenever the brake caliper is disassembled. Do not reuse the drained fluid. Always use genuine DOT3/DOT4 brake Fluid. Using a non-genuine DOT3/DOT4 brake fluid can cause corrosion and decrease the life of the system. Make sure no dirt or other foreign matter is allowed to contaminate the brake fluid.