How much petrol do I have left when the light comes on?
For many cars, the warning light comes on when there is between 10% and 15% of the tank’s capacity left. When it starts flashing, you’ve probably got less than 10% left. But while 50 miles seems to be what most drivers believe the average range is, in reality it varies significantly across different makes and models.
Are there any problems with the Hyundai Getz?
It has recently been s… This problem will happen when it wants to, I have removed the connector that houses the ignition switch module and clean… My 1.2 2005 hyundai getz has started to drive sluggishly and an engine warning light has come on. I have just had it se…
What does the Mil flashing on Hyundai Getz mean?
Hyundai Getz – engine management light – Railroad. If the MIL is flashing it indicates that the ECM has detected an engine misfire.
Why does the immobiliser light go out on a Hyundai Getz?
It could be a faulty alternator that is causing the fault. Hyundai Getz immobiliser key warning light – the immobiliser indicator light illuminates after the ignition key is turned to the “ON” position. The light goes out after the engine is running or after 30 seconds.
What does the Hyundai Getz battery warning light mean?
You can use the iCarsoft i901 Hyundai OBD Code Reader to diagnose & reset this fault. Hyundai Getz battery warning light – if the battery symbol lamp illuminates when driving, it indicates that there is a malfunction within the charging system. It could be a faulty alternator that is causing the fault.
How can I diagnose a Hyundai Getz engine fault?
It could be something simple such as a fault sensor like a MAF, camshaft sensor, crankshaft sensor, ignition coil etc. You can diagnose the engine module with the iCarsoft i901 Hyundai OBD Code Reader which will also allow you to clear the fault codes and remove the engine warning light from the dashboard.
It could be a faulty alternator that is causing the fault. Hyundai Getz immobiliser key warning light – the immobiliser indicator light illuminates after the ignition key is turned to the “ON” position. The light goes out after the engine is running or after 30 seconds.
When does the Hyundai Getz ESC warning light go out?
Hyundai Getz ESC warning light (electronic stability control) – the electronic stability control indicators change operation according to the ignition switch position and whether the system is in operation or not. They will illuminate when the ignition key is turned to the “ON” position, but should go out after approximately three seconds.
What are the warning lights on a Hyundai?
They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 70 of them, so search carefully! Models examined include Accent, IONIQ, Kona, Elantra, NEXO, Santa Fe, Sonata, Tucson, Veloster and Venue.