How does the camshaft work on a Hyundai Accent?
The Hyundai Accent utilizes camshaft actuators to change the valve lift depending on the RPM of the motor. This allows for a more efficient cam profile at any speed. With P0012, the camshaft actuator is leaving the timing retarded. Camshaft Position Actuators change the lift of the camshaft up to 25 degrees.
What are the timing marks on a Hyundai 2010?
Looking for a pic of the timing marks for the 1.6 dohc hyundai 2010. I’ve got the crank on TDC and exhaust cam on the mark. But dont have a guide to go off for 2nd cam.
What are the timing marks on a cam?
Normally the chain link will have three marks on it. Like two yellow and an orange. The cam and crank sprockets will have a mark on them where the color links will go on. Unfortunately since your vehicle is a 2015 the manufacture has not released any information for that repair. If the timing is not set properly you will damage the valves.
What does p0012 stand for in Hyundai Accent?
P0012 is generic, which means that it has the same definition for the Accent as it does on any other vehicle. VVT changes the frequency and distribution of gases entering and exiting the combustion chamber.
Looking for a pic of the timing marks for the 1.6 dohc hyundai 2010. I’ve got the crank on TDC and exhaust cam on the mark. But dont have a guide to go off for 2nd cam.
Where is the timing mark on a camshaft?
Turn the crankshaft pulley, and align its groove with timing mark “T” of the timing belt cover. Check that the timing mark of camshaft sprocket is aligned with the timing mark of cylinder head cover. (No.1 cylinder compression TDC position) Remove the crankshaft pulley bolt and crankshaft pulley (A).
How do you adjust the timing belt tension?
Adjust the timing belt tension. (1) Loosen the tensioner pulley mounting bolt and apply tension to the timing belt. (2) After checking the alignment between each sprocket and each timing belt tooth, tighten the mounting bolt (A) and (B) one by one. (3) Then recheck the belt tension.