Do brake lights need Relays?
If the brake lights do not illuminate, you do not need a Brake-lite Relay. If you’re using magnetic tow lights or a bulb and socket wiring kit, you do not need a Brake-Lite Relay. If both your motorhome and towed vehicle are wired for separate brake and turn signals, you do not need a Brake-Lite Relay.
Where can I get a brake light switch relay?
Adding a relay to the brake light circuit will remove the heavy current from the brake light switch. The relay to use is a general purpose 30 Amp automotive relay, sometimes known as a Bosch relay. They are available from Radio Shack and most auto parts stores. The relay can be mounted anywhere that is convenient.
What to do when your brake lights are not working?
In the situation when brake lights are not working properly, you need to make sure that the power is going through and check the fuse. If the brakes lights are turned on at the same time as turn signal lights, you need to bring it to the mechanics for a check.
Where to mount a brake light relay on a MGAs?
I mounted mine close to the original brake light switch, but it can just as well be mounted in the trunk (for the MGAs or MGBs), close to one of the tail light/brake light assemblies (if you do this, you will need to bring a source of 12 volts, other than the 12 volts that is switched by the brake light switch, back to where the relay is mounted).
How does a diode work on a brake light relay?
The diode can be soldered across terminals 85 and 86 of the relay. The advantage of the capacitor is that the capacitor acts as an arc suppressor and the diode collapses the field of the relay coil, eliminating any inductive surge across the brake light switch when it opens.
Why are the brake lights not working but the tail lights are?
Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.
What to do when none of the brake lights work?
None of the Brake Lights Work When none of the brake lights work, you need to concentrate on those components or devices that may affect the whole circuit: This includes the fuse, brake light switch, turn light switch (on some vehicle models), and the part of the circuit feeding current to the brake light circuit.
Where is the brake light switch on my car?
Fuse Box and Light Switch. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm.
How long does it take to replace a brake light bulb?
How long does it take to fix a brake light? 1 hour. This is the maximum time for brake light bulb replacement since it is not complicated at all. The process should be around 40 to 60 minutes to complete.