Can a Santa Fe transmission filter be replaced?
hello! The filter on your Santa Fe is internal to the transmission and is not a component that is serviced for maintenance. Replacing the internal filter requires transmission removal and disassembly, and takes an experienced transmission tech almost 10 hours of labor time to do.
How do you change the transmission fluid and filter on a?
If the fluid does become contaminated and needs to be replaced, having the transmission flushed at a shop that has a power flush machine is the best way to approach the service as this will exchange all 11 quarts of fluid, not just the 3 or 4 that you can change by draining it yourself.
What kind of transmission fluid does a Hyundai use?
You may also want to be aware that your transmission takes a special synthetic fluid; Diamond ATF-SPIII. THis fluid is not commonly available except through the Hyundai dealership parts department, in my experience.
How to remove battery from Hyundai Santa Fe?
Open the tailgate. 2. Find the plastic hex bolt cover and remove the cover with coin or flathead Removal 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead.
Where is the spare tire located in a Hyundai Santa Fe?
Your spare tire is stored underneath your vehicle, directly below the cargo area. To remove the spare tire: 1. Open the tailgate. 2. Find the plastic hex bolt cover and remove the cover with coin or flathead Removal 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
What are the components of a Hyundai Santa Fe?
Variable Intake Solenoid (VIS) Valve 23. Fuel Pressure Regulator Valve 24. Canister Close Valve (CCV) 25. Ignition Coil 26. Main Relay 27. Fuel Pump Relay 28. Data Link Connector (DLC) [16-Pin] 29. Multi-Purpose Check Connector [20-Pin] 1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3.
Where are the ignition coils on a Hyundai Santa Fe?
Schematic Diagrams ECM Terminal And Input/Output signal ECM Terminal Function Connector [C100-A] Pin No. Description Connected to 1 Ignition Coil (Cylinder #2) control output [NON-smart key type] Ignition Coil (Cylinder (Option/accessory.)