How serious is a P0016?

How serious is a P0016?

How Serious Is Code P0016? – Severe. This trouble code can cause the vehicle to be hard to start and run rough. In some cases, the vehicle may not be driveable.

What causes OBD code p0016 on a Hyundai?

Possible causes of OBD code P0016 Hyundai Timing chain stretched, or timing belt skipped a tooth due to wear Misalignment of timing belt/chain Tone ring on crankshaft slipped/broken Tone ring on camshaft slipped/broken Bad crank sensor Bad cam sensor Damaged wiring to crank/cam sensor Timing belt/chain tensioner damaged

Where is the CVVT located on a p0016 Hyundai?

P0016 Hyundai Description The CVVT (Continuously Variable Valve Timing) system is installed to the chain sprocket of the exhaust camshaft. There is no variation in valve timing of the exhaust cam because the exhaust camshaft is driven by the timing belt. The timing of the intake cam is varied by the relative operation the CVVT vane to the housing.

What is the OBD2 code for a Hyundai?

OBD2 Code P0016 Hyundai definition: The crankshaft position sensor (CKP) and Camshaft position sensor (CMP) work in harmony to control the spark/fuel delivery and timing.

What does DTC p0011 mean on a Hyundai?

The Engine Control Module ( ECM) accumulates this deviation for a certain period and sets DTC P0011 when the accumulated deviation is too high. The target camshaft position is predetermined value depending on engine speed and throttle angle in the ECM .

How to check Hyundai p0016 camshaft correlation error bank?

The cam and crank should be precisely timed together. If the PCM detects that the Crank and Cam signals are out of time by a specific number of degrees, this P0016 Hyundai code will set. First, visually inspect the cam and crank sensors and their harnesses for damage. If you notice broken/frayed wires, repair and recheck.

P0016 Hyundai Description The CVVT (Continuously Variable Valve Timing) system is installed to the chain sprocket of the exhaust camshaft. There is no variation in valve timing of the exhaust cam because the exhaust camshaft is driven by the timing belt. The timing of the intake cam is varied by the relative operation the CVVT vane to the housing.

How to fix code p0016 Hyundai valve timing control?

Valve Timing Control (VTC) harness is open or shorted circuit. How do I fix code P0016 HYUNDAI? Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. How much do you know about cars? What does this mean?

How much does it cost to repair a p0016 Hyundai?

The cost of diagnosing the P0016 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. The CVVT (Continuously Variable Valve Timing) system is installed to the chain sprocket of the exhaust camshaft.