How many miles can you drive on empty in a Hyundai Sonata?
For example, the Hyundai Sonata can drive 40 more miles after the gas light turns on. If you are driving the Hyundai Elantra, you can expect to get 30 more miles after your gas light goes on. The Hyundai Sonata and Hyundai Elantra are both great car options for you.
How does the fuel gauge work on a Hyundai Sonata?
When the remaining distance is below 30 miles (50 km), “—” will be displayed and the distance to empty indicator will blink. The meter’s working range is from 30 to 999 miles (50 to 999 km). This mode calculates the average fuel consumption from the total fuel used and the distance since the last average consumption reset.
What should fuel resistance be on Hyundai Sonata?
With the engine OFF for at least 40-secs and the key turned to the RUN position, back probe the fuel sender connector and measure the resistance between pins 1 and 3. Compare the readings to the resistance values below. 2011 and later Sonata Full 6-17Ω, ½ 70-75Ω, Warning light on 168-172Ω, Empty 198-202Ω
What is the odometer range on a Hyundai Sonata?
The odometer is always displayed until the display is turned off. This mode indicates the distance of individual trips selected since the last tripmeter reset. The meter’s working range is from 0.0 to 9999.9 miles (0.0 to 9999.9 km).
What does the tachometer indicate on a Hyundai Sonata?
The speedometer indicates the speed of the vehicle. The speedometer is calibrated in miles per hour and/or kilometers per hour. Tachometer. The tachometer indicates the approximate number of engine revolutions per minute (rpm).
With the engine OFF for at least 40-secs and the key turned to the RUN position, back probe the fuel sender connector and measure the resistance between pins 1 and 3. Compare the readings to the resistance values below. 2011 and later Sonata Full 6-17Ω, ½ 70-75Ω, Warning light on 168-172Ω, Empty 198-202Ω
What should I do if my Hyundai fuel gauge is wrong?
If you encounter a Hyundai Fuel gauge readings wrong or erratic condition on the vehicles listed below or find any of the following trouble codes: P0461, P0462, P0463, B1562, perform the tests shown below. What causes erratic fuel gauge readings or wrong fuel gauge readings?
How does a fuel sending device work on a Hyundai?
A fuel sending device is simply a float arm connected to a variable resistor. When the tank is full and the float arm is at the top of its travel the variable resistor provides a low resistance. As the vehicle uses fuel and the float arm falls, resistance increases.
Why is the Check Engine light on on my Hyundai?
Plus, some vehicles may display a check engine light on with the following trouble codes: You’ll need a DVOM meter set to the ohms setting and you’ll have to access the fuel sender in the gas tank. The problem is either the sender itself, corrosion of bad connection in the electrical connector to the pump/sender or in the wiring harness.