Why my Hyundai i20 brake light and rear light is on by itself?
Hyundai i20 Brake Warning Light Causes You’ll feel a loss of pressure that manifests itself in the form of a “mushy” brake pedal. If the brake light is only coming on when you push the brakes, that’s a definite indication that the pressure in the brake system is too low. Either the brakes need bled, or there is a leak.
How do you turn off the brake light on a i20?
Underneath the dashboard there is a switch that the brake pedal presses into. When you press the brakes this switch is activated and the brake lights turn on. When you take your foot off the brake, it presses this switch in and the brake lights turn off.
Is there a problem with Hyundai brake lights?
HYUNDAI Australia will voluntarily call 227,000 cars back to dealerships to replace a faulty brake light switch across eight models – representing most of its range – after News Limited exclusively unearthed the fault late last year. The problem exists in Hyundais made from 2002.
Why is my brake light not working on my car?
If the brake light switch is functional, you have to check for a bad electrical ground (some car models have the switch provided ground). It could happen due to a loose connection of the wire or the corrosion or damage of the wire ends.
Where are the brake lights on my car?
You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights.
Why do the lights on my Hyundai Sonata not turn off?
My research so far indicates that the fuse box and the bcm are separate units in the 2007 sonata, but they are combined in later models. Any help with this would be appreciated. Same issue as everyone above. Lights will not always turn off when you switch them off. Driving lights will stay on and have caused the battery to drain twice.
What does the Hyundai Getz battery warning light mean?
You can use the iCarsoft i901 Hyundai OBD Code Reader to diagnose & reset this fault. Hyundai Getz battery warning light – if the battery symbol lamp illuminates when driving, it indicates that there is a malfunction within the charging system. It could be a faulty alternator that is causing the fault.
How can I tell if my Hyundai Getz has a fault?
The only way you can find out for sure where the fault is coming from is to use a kit such as the iCarsoft i901 Hyundai OBD Code Reader which will cover the ABS system and tell you where the fault is. It will also allow you to erase the fault code & dash light once the problem has been fixed.
Why does the immobiliser light go out on a Hyundai Getz?
It could be a faulty alternator that is causing the fault. Hyundai Getz immobiliser key warning light – the immobiliser indicator light illuminates after the ignition key is turned to the “ON” position. The light goes out after the engine is running or after 30 seconds.
This is located on the bracket for the brake pedal. Follow the brake pedal lever up and you will see the switch resting against it. Unplug the switch and see if the lights go out. If they do, replace the switch to resolve the problem. .